Genset di Bogor

GENSYS 2.0 MARINE Demonstration Suitecase KitGENSYS 2.0 MARINE Demonstration Suitecase KitOur test and demonstration case has been developed to test and show all GENSYS 2.0 MARINE's type of applications. Inputs/outputs are wired on switch or lamps. Connections are made with a 230 VAC outlet.This demonstration kit, built in flight case, combines

GENSYS2.0 CORE MARINECore unit for all-in-one genset control & paralleling unit with integrated PLC : PMSGENSYS2.0 CORE MARINEThe GENSYS 2.0 CORE MARINE is an easy-to-use rear-mounted, control and paralleling module which can synchronize up to 32 generators.GENSYS 2.0 CORE MARINE is configured with CRE Config software or via its embedded Web si

GENSYS2.0 MARINEAll-in-one parallaling unit for marine applications: PMSGENSYS2.0 MARINEThe GENSYS 2.0 Marine is a control unit designed for marine generator switchboards panels.This Power Management System unit combines all necessary functions:• Engine start/stop and protections,• Alternator control and protections,• Mechanical &

RDM2.0 MARINERemote display module for all-in-one genset control and paralleling unitRDM2.0 MARINEThe RDM 2.0 MARINE works as a remote display and, combined with the GENSYS 2.0 CORE MARINE, can control a single or a multiple generating sets power plant.Connected to a GENSYS 2.0 MARINE, the RDM 2.0 MARINE can be used as an additional remote module.R

UNIGEN ILSIsochronous load sharing in island mode or in parallel with mainsUNIGEN ILSAdvantages:- DROOP (analog)Possibility of load sharing with Droop. Curve is compatible with Barber Colman Droop.- Compatible with Barber Colman load sharersUNIGEN ILS is equipped with an analogue output for speed control.- Compatibility with all electronic speed go

UNIGEN PLUSGenerating set Auto Synchroniser and load sharerApplications:- Isochronous load sharing in island mode or in parallel with mains.UNIGEN will be used on generator sets that require synchronising, load sharing and paralleling features.UNIGEN can be used to parallel either a single genset with mains or up to 8 gensets together. One UNIGEN i

MASTER2.0All-in-one mains parallaling unit with integrated PLCMASTER2.0The Master 2.0 is a power plant controller for gensets in parallel with one or several mains.This “all-in-one” unit includes all necessary functions:• Multi mains management• Three phase mains failure detection• Electrical protection• Electrical p

RDM2.0Remote display module for all-in-one generatort control & paralleling unitRDM2.0The RDM 2.0 works as a remote display and, combined with the GENSYS 2.0 CORE, can control a single or a multiple generating sets power plant.Connected to a GENSYS 2.0, a GENSY 2.0 LT or a MASTER 2.0, the RDM 2.0 can be used as an additional remote display.RDM

UNIGENGenerating set Auto Synchroniser and load sharer.UNIGENApplications:- Isochronous load sharing in island mode or in parallel with mainsUNIGEN can be used to parallel up to 8 gensets together. One UNIGEN is needed per generator set.- Mobile gensetsWith its digital "Super Droop" function, unique on the market, UNIGEN makes the mobile

GENSYS2.0 LTAll-in-one genset control & paralleling unit GENSYS2.0 LTThe GENSYS 2.0 LT is a control unit designed for generator electrical panels.This “all-in-one” unit combines all necessary functions:• Three phase mains failure• Engine start/stop and protections• Alternator control and protections• Mechani

C2S 230VAC This second generation of microprocessor module combines all the visualization and control functions needed to couple a generator to a bus bar manually: display of the phase, frequency and voltage differences, a safety relay which monitors these three parameters and indicates the status of the installation. This new version does not

DUOGENDuogen is a microprocessor based single module which gathers the control of two generators. DUOGEN carries out manual and auto synchronization, isochronous load sharing or droop load sharing. DUOGEN integrates the following features: - 1 Digital input for auto synchronization - 1 Sync check relay is checking phase, frequency and voltage diffe

Gensys 2.0 Demonstrasi suitecase KitDemonstrasi koper untuk Gensys 2.0 Gensys 2.0 Demonstrasi suitecase Kituji kasus dan demonstrasi kami telah dikembangkan untuk menguji dan menunjukkan jenis semua Gensys 2.0 dari aplikasi. Input / output kabel pada switch atau lampu. Koneksi yang dibuat dengan outlet 230 VAC.kit demonstrasi ini, dibangun dal

Gensys COMPACT PRIME GENSYS COMPACT PRIMEThe Gensys COMPACT PRIME is a new panel-mounted generator controller fit for standby application.This new generation of controller is optimized for its ease of use. It’s small size and simple features enable an easy installation and configuration for up to 32 generators in island-parallel. GENSYS

GCR 400VACDigital power plant commander GCR 400VACThe GCR 400VAC allows the synchronizing, the coupling and the power control of one or several generating sets in parallel with one or several commercial powers.It can be used with the synchronisers and load-sharing modules from Barber Colman & Woodward and permits permanent or temporary par

GENSYS 2.0Paralleling unit with integrated PLCGENSYS 2.0The GENSYS 2.0 is a control unit designed for generator electrical panels.This “all-in-one” unit combines all necessary functions:• Three phases mains failure• Engine start/stop and protections• Alternator control and protections• Mechanical parameters display&b

Gensys 2.0 COREunit kontrol untuk semua-dalam-satu kontrol gensent & paralel Unit terintegrasi dengan PLCGensys 2.0 COREThe Gensys 2.0 CORE merupakan modul yang mudah digunakan belakang-mount, kontrol dan paralel yang dapat menyinkronkan hingga 32 generator.Modul ini dirancang untuk bekerja dengan independen remote display modul RDM 2.0 layar y

GCR 100VACThe GCR 100VAC allows the synchronizing, the coupling and the power control of one or several generating sets in parallel with one or several commercial powers.It can be used with the synchronisers and load-sharing modules from Barber Colman & Woodward and permits permanent or temporary paralleling.The GCR 100VAC is easily adjustable

TCGEN2.0 The TCGEN 2.0 is a comprehensive AMF unit for a single generating set operating in standby mode. It offers a complete manual and automatic management for generator and mains. The electronic module TCGEN 2.0 is enabling remote monitoring and control. The unit is completely programmable by a software that allows one or more setting c

GENSYS2.0 MARINEThe Gensys 2.0 Kelautan adalah unit kontrol yang dirancang untuk generator laut switchboards panelUnit Power Management System ini menggabungkan fungsi semua yang diperlukan:Engine start / stop dan perlindungan,kontrol alternator dan perlindungan,Teknik & electricial display parameter,Generator sinkronisasi,Berbagi beban dan kon

C2S 400VAC This second generation of microprocessor module combines all the visualization and control functions needed to couple a generator to a bus bar manually: display of the phase, frequency and voltage differences, a safety relay which monitors these three parameters and indicates the status of the installation. This new version does not

MNS The MNS is a basic, microprocessor controlled unit designed to monitor 3-phase mains voltages, send remote start commands to the generating set, and manage changeover of both the generator and the mains contactors. The genset should be controlled by a Remote Start control unit.

MDM The MDM unit from CRE TECHNOLOGY is a basic, microprocessor controlled unit designed to start and stop the genset manually using the key switch and pushbuttons on the front panel. It has high power relay outputs enabling it to interface directly with diesel gensets. When the engine is running, the unit monitors fault conditions and shuts down

BSD 2.0 BSD 2.0 is a remote monitoring and controle box for GENSYS COMPACT PRIME and GENSYS 2.0 application. It communicates via GSM/GPRS/3G using a SIM card - compatible with most of the worldwide network - or over wired Ethernet. Data are saved on a server. The server offers pages presenting the values on widgets, plotting them for trendi

MDA The CRE Technology unit MDA is a low cost, microprocessor controlled unit designed to start and stop the genset automatically on request of an external Remote Start signal. It has high power relay outputs enabling it to interface directly with diesel gensets.

Modul Genset ACGEN2.0 (Auto start controller)      The ACGEN 2.0adalah lengkap modul genset auto start controller dengan remote / berhenti untuk single generating set dalam mode standby. Modul ACGEN 2.0 kontroler digunakan untuk kontrol otomatis dan manual generator.Fitur Uji memungkinkan Anda untuk mengatur berbagai tes mandiri

Genset Bensin Daimaru untuk kebutuhan listrik industri anda

Mesin diesel putaran tinggi (>1000 RPM) akan mengkonsumsi lebih banyak bahan bakar dari pada mesin putaran menengah maupun putaran rendah.Pada grafik terlihat besarnya porsi biaya bahan bakar pada total biaya operational mesin diesel. Besarnya konsumsi bahan bakar sangat dipengaruhi kualitas bahan bakar, kondisi operasi dan perawatan.Solar memil