Alat uji Triaxial otomatis Autotriax 2

  • Pembelian Minimum 1 Call
  • Negara Asal Israel
  • KategoriAlat Uji Tanah
  • Update Terakhir06 Nov 2017

Spesifikasi Alat uji Triaxial otomatis Autotriax 2

Automatic triaxial tests system - AUTOTRIAX 2

Brand : Wykeham Farrance/ControlsGroup – Italia

Standard : BS 1377:7 | ASTM D2850 | ASTM D4767 | BS 1377:8 | BS 1377:6 | ASTM D7181


Fitur Utama :

  • 24/7 testing without interruption, maximizing productivity and reducing demands on your staff.
  • Automatic execution of up to six independent triaxial tests from start to finish with only one PC;
  • Fully PC control system with multitasking, user-friendlyWindows-based, the PC software complies with relevant standards;
  • High-speed PC closed loop control for continuous monitoring and instantaneous reaction of systems components;
  • Modular design for easy expansion of the system, just adding proper software packages and components;
  • Maximum flexibility with four models of water pressure / volume controllers;
  • External factors and inconsistencies between different operators are minimized; test procedures are always repeatable and compliant;
  • Banded reinforced triaxial cell for max working pressure up to 3500 kPa, suitable also for extension tests;
  • Compatible with on-sample transducers and bender elements;
  • Space saving design;
  • Air compressor not required (with exception of unsaturated soils tests).


General Description : 

The AUTOTRIAX 2 is an advanced triaxial testing system that can automatically perform up to 6 entire and independent tests at the same time, from start to finish, without any human intervention.

The closed-loop feedback control system monitors the components status continuously, in order to react to any change in the parameter pre-set at each test stage.  
Autotriax 2 can perform different kind of triaxial tests, :

  • Total and effective stress tests UU (unconsolidated undrained), CU (consolidated undrained) and CD (consolidated drained)   isotropic conditions according to ASTM and BS Standards;
  • Stress path tests following MIT and Cambridge methods;
  • K0 anisotropic volume controlled tests;
  • Permeability tests in triaxial cells according to BS 1377: 6;
  • Unsaturated soil triaxial test with control of matric suction using the axis translation method.

Also, additional software package available on request for performing:

  • CRS – Constant Rate of Strain
  • Hydraulic consolidation
  • Unconfined compression
  • CBR (California Bearing Ratio)

A typical PC controlled fully automatic triaxial configuration includes:

Load frame 
TRITECH 50 kN or 100 kN: TRITECH original high-performance load frames for triaxial tests, ideal solution for advanced and research laboratories that want to perform high quality tests at high productivity levels, directly managed by data acquisition and control unit.  

Triaxial cell with accessories:
The proper model can be selected from our range (see triaxial load frame TRITECH  and triaxial cells for advanced applications or  double wall triaxial cells required for unsaturated tests) or, as alternative, existing machines can be used.

Data acquisition and control unit 
Data acquisition and control unit transmitting data and information between the software and all the active components, such as pressure controllers and Tritech triaxial load frame.

Pressure/volume controller 
Four models are available depending on: max pressure capacity (3500 or 1700 kPa) and number of pressure lines (one or two).

Triaxial test automatic control and processing software.
The AUTOTRIAX 2 software is a comprehensive and user-friendly interface between the operator and the testing system.
The Autotriax 2 configurations can be extended and expanded in subsequent steps, in order to control further tests adding proper components. These operations can be easily made on site just configuring the user-friendly software, as a plug-and-play system.

Technical Specifications :

Maximum no. of simultaneous tests: 6
Maximum no. of channels: 96 (in the most extended configuration)
Maximum sample diameter: 150mm
Maximim load: 100 kN cap.
Maximum water pressure: 3500 kPa
Maximum air pressure: 1000 kPa
Maximum volume of pressure/volume controller: 250 cc


Kategori : alat uji tanah

Informasi Produk :


Hp. 0811 188 6845

Email :;

Harga Alat uji Triaxial otomatis Autotriax 2


Dapatkan penawaran terbaik untuk
Alat uji Triaxial otomatis Autotriax 2 !

Minta Penawaran

Produk Lainnya Dari Geolabnemo adalah media iklan khusus Perusahaan, Toko, Distributor, Grosir, Agen, Supplier, Importir, Exportir, Trading dan Pabrik. Jika Anda tertarik untuk membeli Alat uji Triaxial otomatis Autotriax 2 ini dengan harga murah, Mohon hubungi Kontak Perusahaan ini diatas.

Jika Anda adalah perusahaan yang ingin menjual di , Anda bisa mendaftarkan perusahan Anda disini
Kontak Supplier

Verified Supplier
3 Tahun
Response Rate :
Jl. Abdul Muis No. 36Q - Tanah Abang Jakarta Pusat, DKI Jakarta - Indonesia

Perusahaan Lainnya yang berkaitan dengan Geolabnemo

CV. Gihon Juma Sentosa

Verified Supplier
Indotrading gold member
1 Tahun
Response Rate 100%

PD. Karya Mitra Mulia

Verified Supplier
Indotrading gold member
1 Tahun
Response Rate 99%

CV. Hansa Indo Perkasa

Verified Supplier
Indotrading gold member
1 Tahun
Response Rate 86%