The IJ-RGB-1002 Color Analyzer is a portable color analyzer equipped with an external sensor probe having a 45° /0° color measuring geometry. The modem, accurate microprocessor technology uses the spectral analysis method to determine the color of the sample. Excellent repeatability due to spectroscopic analysis technique used.
The IJ-RGB-1002 Color Analyzer is designed mainly for measuring the color of no lighting sample such as textiles, paper, leathers, painting materials... It is the useful tool for the quality control and the wide industrial application.
Friendly operation, just press the operation button will get the color value ( R, G, B or H, S, L ).
* Measuring sample : no lighting sample ( textiles, paper, leathers... ).
* Measurement value : RGB value, HSL value ( Hue/Saturation/Luminance ).
* 45 /0 color measuring geometry.
* Used the spectral analysis method to determine the color of the sample
* Complete set included the color probe and the meter, display the measurement value from
* LCD display, show RGB or HSL value at same time, LCD size : 59 mm x 34 mm.
* Power : 006P DC 9V battery.
* Meter size : 203 x 76 x 38 mm.
RGB value R ( Red ) value : 0 to 1023. G ( Green ) value : 0 to 1023. B ( Blue ) value : 0 to 1023.
HSL value Hue value : 0 to 1.000. Saturation value : 0 to 1.000.Luminance value : 0 to 1.000.
R (Red) value
G (Green) value
B (Blue) value
* Repeatability is specified under the same sample tested 10 times within two minutes.
* Accuracy is specified under after the instrument is calibrated.
Type 1 : No lighting sample material : Such as textiles, paper, leathers...
Type 2 : Lighting sample material : Such as CRT, LCD monitor,LED lamp, lighting lamp.....
* The RGB-1002 is designed mainly for measuring the color value of type 1 ( nolighting sample ).
For the type 2 ( lighting sample ) color measurement just for the reference only.
OP button ( Operation button )
CAL button ( Calibration button )
REL button ( Relative button )
RGB/HSL button (Select RGB or HSL value )
Light ON/OFF button * No lighting sample measurement, select the sensor light to on.
* Lighting sample measurement, select the sensor light to off.
Auto shut off saves battery life or manual off by push button.
* Power will off automatically after 3 min., if no buttons be pressed.
Low battery indicator.
RS 232 PC serial interface.
0 to 50C ( 32 to 122F ).
Less than 80% RH.
DC 9V battery, Alkaline type 006P, MN1604(PP3) or equivalent.
DC 9V adapter input. @ AC/DC power adapter is optional.
* AC to DC 9V adapter. * RS232 cable, UPCB-02. *USB cable, USB-01.
* Data Acquisition software, SW-U801-WIN.
Tag : Analyzer Lainnya
: Approx. DC 6.3 mA. Measurement : Approx. DC 32 mA. ( 2 SEC. )
478 g/ 1.05 LB. * Main instrument and the sensor probe
Main instrument : 203 x 76 x 38 mm Sensor probe : 160x92x45 mm
Instruction manual........................ 1 PC.
Sensor probe ( RGB-1002P ).......... 1 PC.
White color calibration card........... 1 PC.
Carrying case, CA-06..................... 1 PC.
Tag : Analyzer Lainnya