Electromagnetic Flow Meter (GPE F5001)
The principle of F5001
Electromaagnetic flow meter is based on Faraday’s law of electromagnetic
Induction, according to which the sensor converts the flow into an electrical
voltave proportional to the velocity of the flow. The processed sognal will be
mulpiplied by the pipe cross-sectional area and resulted in flow volume.
F5001 electromagnetic flow meter
offer you cost-effective flow measurement with high accuracy.
Small influence by density, viscosity,
temperature, pressure, or conductivity of the medium
No moving part in the measuring pipe, and not
sensitive to vibration,
Various lining material and electrode chosen for
SMT (surface mounted technology),
Low requirement of straight pipe (5D:2D),
IP67 for compact version, and IP68 for remore
SMART: low-consumption, small zero-point drift,
self-examiation, nonlinear correction, bi-directional measurement, high
Explosion-proof: Exdela II CT4.
Flow Meter :
Accuracy : +/- 0,5%, +/- 0,3%
Repeatbillity : 0,25%,
Working Temperature :
Remote Version : (-20 to + 120) C For sensor,
(-10 to + 50) C for transmitter
Compact Version : (-10 to + 65) C
Working Pressure : (0.6 to 42) MPa,
Size : 15 to 2400mm,
Humidity : (5% to 95%) RH,
Ambient Magnetic Strength: 400A/m,
Conductivity ≥ 5µ/cm,
Power Supply: 16 to 36V DC / 85 to 265V AC (50/60Hz)
Measuring Tube: SS304
Electrode Material: SS316L, Hastelloy, Titanium,
Tantalum, Platinum/Lridium, Monel, Tungsten Carbide, Etc.
Tube Lining: PTFE, Synthetic Rubber, FEP, etc
Multiple Output Signal: Current (4 to 20)mA/ (0
to 10)mA, Frequency (1 to 5000)Hz, HART/Modbus Protocol.
F5001 Electromagnetic flow meter
offer you cost-effective flow measurement with high accuracy for a wide range
of process conditions. And it can be applied to the supply, distribution,
conveyance and discharge of water and waste water in such field as process
industry, waste water treatment, chemical industry, steel industry, mining,
pulp & paper, irrigation, power generation.