Jual FRITSCH Planetary Mill PULVERISETTE 5/4 classic line Harga Murah Bekasi oleh CV. Andalan Prima Sejahtera

FRITSCH Planetary Mill PULVERISETTE 5/4 classic line

Rp100

Spesifikasi FRITSCH Planetary Mill PULVERISETTE 5/4 classic line

Order No. 05.5020.00

FRITSCH Planetary Mill  PULVERISETTE 5/4  classic line

OVERVIEW

Ideal for large quantities

The Planetary Mill PULVERISETTE 5 classic line with 4 working stations delivers fast and reliable, due to the particularly high-energy effect of the grinding balls, loss-free grinding results of hard, medium-hard, soft, brittle, tough and moist materials down to colloidal fineness. Depending on the desired final fineness, can the grinding be performed dry, in suspension or in inert gas. 
Besides for comminution, the Planetary Mill can be utilized for mixing and homogenizing of emulsions and pastes or for mechanical activation and alloying in material research.

WORKING PRINCIPLE

Comminution according to the Planetary Principle

The comminution of the material to be ground takes place primarily through the high-energy impact of grinding balls. To achieve this, the grinding bowl, containing the material to be ground and grinding balls, rotates around its own axis on a main disk whilst rotating rapidly in the opposite direction. At a certain speed, the centrifugal force causes the ground sample material and grinding balls to separate from the inner wall of the grinding bowl. The grinding balls then cross the bowl at high speed and further grind the sample material by impact against the opposite bowl wall. In addition, impact between the balls themselves on the sample material adds to the size reduction process. 
Due to the rotational speed of the main disk – up to 400 rpm – achieves the PULVERISETTE 5 classic line a centrifugal acceleration of up to 22 g.

FEATURES

  • Fast comminution of laboratory samples with up to 400 rpm
  • 4 working stations
  • Simultaneous processing of up to 8 samples
  • Useful capacity up to 4 x 225 ml
  • Toothed belt drive for bowls provides constant transmission ratio
  • Rotational speed regulated by microprocessor
  • Digital display of the actual rotational speed of the supporting disk
  • Programmable grinding and pause times and grinding sequences – for short-time operation adjustable down to the second
  • Smaller grinding bowls also possible with an adapter
  • RS232 interface for transmission of process parameters (validation)
  • Reversing function
  • Overload protection with automatic rotational speed adjustment and display
  • Maintenance-free drive due to electronically regulated rotary current motor (1.5 kW) with frequency converter and permanently lubricated bearings
  • Grinding chamber hood safety lock with stoppage monitoring
  • Membrane keyboard
  • Grinding chamber with forced air ventilation
  • Gas pressured springs for easy opening of the cover
  • Energy-save-function (electricity-saving mode)
  • Extensive accessories for simplifying your daily work

SAFE GRINDING BOWL CLAMPING

Reproducible grinding results and absolutely safe grinding bowl clamping 

The constant transmission ratio, the regulated rotational speed and precision quartz timing, ensure exactly reproducible grinding results. The Safe-Lock System, which is delivered with a torque wrench, enables simple and safe clamping of the grinding bowls - absolutely risk-free.

MEASURING OF GAS PRESSURE AND TEMPERATURE

GTM – Gas Pressure and Temperature Measuring System

The Planetary Mill PULVERISETTE 5 classic line can be combined with the GTM-System for measuring of the gas pressure and temperature during grinding. This turns your mill into an analytical measuring system.

 

APPLICATIONS / SOLUTIONS

 

  • INFLUENCE OF PROPERTIES OF GRINDING BOWLS IN THE PLANETARY SYSTEM

    A clean and constant wear on the inner grinding bowl surface is a question of the amount of grinding balls and size, material amount and size (coarse or fine), the grinding condition like wet or dry grinding, the grinding duration and the adjusted rotations of the planetary system.

     

  • FROM “BOULDER” TO NANO-PARTICLES

    Medium-hard to hard materials with edge lengths up to 95 mm can be pre-crushed with the FRITSCH Jaw Crusher PULVERISETTE 1 so an additional fine comminution with many FRITSCH mills is possible.

     

  • ADDITIVES FOR DRY MILLING

    During a dry grinding, often only after a short grinding period hygroscopic material tends to stick. A second factor causing this is the static charge respectively adhesive powers of fine particles.

     

  • CRUSHING CONCRETE COARSELY AND FINE

    Concrete is a complex material, which its characteristics due to its composition and as a result of the systematic addition of additives can be adjusted very differentiated. However, this results in the demand to monitor this composition for two reasons: in order to ensure the desired useful properties and also to ensure the quality of the mixture.

     

  • PLANETARY BALL MILLS AS AN INSTRUMENT IN MECHANOCHEMISTRY

    One of the most significant fields of application for FRITSCH Planetary Mills is mechanochemistry. This subject is in theory, as well as in practice very wide-ranging and versatile. In the article you will find summarized information about history, functionality and the fields of application of mechanochemistry.

     

  • PIGMENT PROCESSING: THE ISOLATION OF THE NATURALLY BEAUTIFUL

    Mankind has always enjoyed enduring works of art. The particles of the pigments have always been playing a major role. For example, the oldest cave paintings still impress us today. One of the most renowned experts for the production of historical pigments is Dr. Kremer from Aichstetten (Bavaria, Germany). FRITSCH laboratory mills are of great importance in Dr. Kremer's pigment processing.

TECHNICAL DATA

Working principleimpact force
Optimal for material typehard, medium-hard, soft, brittle, tough, moist
Number of working stations4
Grinding toolsgrinding bowls and grinding balls
Materials of the grinding toolsagate, sintered corundum, silicon nitride, zirconium oxide, hardened stainless steel, hardmetal tungsten carbide
Grinding bowl sizes80, 250, 500 ml
Grinding ball diameter0.1 - 40 mm
Max. feed size (depends on material)10 mm
Min. sample quantity10 ml
Max. sample quantity900 ml
Final fineness (depends on material)< 1 µm
Typical grinding time down to analytical fineness4 min
Grinding processdry/wet
Grinding in inert gasyes
Gas pressure and temperature measurementyes
Rotational speed of main disk50 - 400 rpm
Transmission ratio planetary disk / grinding bowli relative = 1 : -2.19
Effective diameter of main disk~ 250 mm
Centrifugal acceleration (g = 9.81 m/s²)22 g
Interfacesyes
Electrical details200-240 V/1~, 50 – 60 Hz, 1730 Watt
Instrument also available in the following voltage100-120 V/1~, 50-60 Hz, 1470 watt - order no. 05.5010.00
Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, grinding bowls/balls, selected rotational speed)up to approx. LpAd = 83 dB
Weight120 kg
Dimensions (W x D x H)bench top instrument 58 x 67 x 57 cm

 

ACCESSORIES

Please note: For the Planetary Mill PULVERISETTE 5/4 classic line, you require at least 4 grinding bowls of your choice and the corresponding number of grinding balls. The grinding bowl material must also be harder than the material to be ground. In normal cases, grinding bowls and balls of the same material are used. To shorten the grinding time, larger or heavier grinding bowls and grinding balls with a higher density and correspondingly higher impact energy can be used. Please take note of the useful capacity, this is not identical with the bowl volume!

GRINDING BOWLS

Please select 4 grinding bowls, which are offered in the sizes 500 ml, 250 ml and 80 ml to perfectly match your sample volume. The useful capacity of the grinding bowls can be found in the selection aid.  Grinding bowl 80 ml: One grinding bowl holder can be equipped with 2 bowls 80 ml or 1 bowl 80 ml using an adapter to mount the bowls on top of each other.
For the best grinding results in each individual case, all grinding bowls are available in 6 different materials, thus directly preventing contamination of the samples as a result of undesired abrasion.

SELECT GRINDING BOWL VOLUME

GRINDING BOWL 500 ML VOLUME

AGATE - SIO2 - WITH STEEL CASING

No. 50.1055.00

SINTERED CORUNDUM - 99.7% AL2O3

No. 50.1060.00

SILICON NITRIDE - SI3N4 - WITH STEEL CASING

No. 50.1310.00

ZIRCONIUM OXIDE - ZRO2

No. 50.1110.00

HARDENED, STAINLESS STEEL - FE - CR

No. 50.1090.00

REPLACEMENT SEAL RING PTFE FOR GRINDING BOWLS 500 ML VOLUME

REPLACEMENT SEAL RING PTFE 121/110 MM DIA. FOR AGATE GRINDING BOWLS OF 500 ML VOLUME

No. 50.2661.20

REPLACEMENT SEAL RING PTFE 110/101 MM DIA. FOR SILICON NITRIDE GRINDING BOWLS OF 500 ML VOLUME

No. 50.1010.20

REPLACEMENT SEAL RING PTFE 116/200 MM DIA. FOR ALL OTHER GRINDING BOWLS OF 500 ML VOLUME

No. 50.1230.20

GRINDING BOWL 250 ML VOLUME

AGATE - SIO2 - WITH STEEL CASING

No. 50.2055.00

SINTERED CORUNDUM - 99.7% AL2O3

No. 50.2060.00

SILICON NITRIDE - SI3N4 - WITH STEEL CASING

No. 50.2310.00

ZIRCONIUM OXIDE - ZRO2

No. 50.2110.00

HARDENED, STAINLESS STEEL - FE - CR

No. 50.2090.00

HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING

No. 50.2080.00

REPLACEMENT SEAL RING PTFE FOR GRINDING BOWLS 250 ML VOLUME

REPLACEMENT SEAL RING PTFE 85/70 MM DIA. FOR AGATE GRINDING BOWLS OF 80 + 250 ML VOLUME

No. 50.2011.20

REPLACEMENT SEAL RING PTFE FOR 85/76 MM DIA. FOR SILICON NITRIDE GRINDING BOWLS OF 250 ML VOLUME

No. 50.2010.20

REPLACEMENT SEAL RING PTFE 90/75 MM DIA. FOR ALL OTHER GRINDING BOWLS OF 250 ML VOLUME

No. 50.2230.20

GRINDING BOWL 80 ML VOLUME

AGATE - SIO2 - WITH STEEL CASING

No. 50.4055.00

SINTERED CORUNDUM - 99.7% AL2O3

No. 50.4060.00

SILICON NITRIDE - SI3N4

No. 50.4310.00

ZIRCONIUM OXIDE - ZRO2

No. 50.4110.00

HARDENED, STAINLESS STEEL - FE - CR

No. 50.4090.00

HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING

No. 50.4080.00

REPLACEMENT SEAL RING PTFE FOR GRINDING BOWLS 80 ML VOLUME AND ADAPTER

REPLACEMENT SEAL RING PTFE 85/70 MM DIA. FOR AGATE GRINDING BOWLS OF 80 + 250 ML VOLUME

No. 50.2011.20

REPLACEMENT SEAL RING PTFE 80/65 MM DIA. FOR ALL OTHER BOWLS OF 80 ML VOLUME

No. 50.4230.20

ADAPTER FOR GRINDING BOWLS 80 ML VOLUME

No. 90.1120.09

 

 

GRINDING BALLS

For achieving best grinding results grinding balls  are available in 0.1 - 40 mm diameters and in 6 different materials, thus directly preventing contamination of the samples as a result of undesired abrasion. The recommended number of balls per grinding bowl can be found in the selection aid.

SELECT THE GRINDING BALL DIAMETER

GRINDING BALLS 40 MM DIAMETER FOR GRINDING BOWL 500 ML

SINTERED CORUNDUM - 99.7% AL2O3

No. 55.0400.06

SILICON NITRIDE - SI3N4

No. 55.0400.31

ZIRCONIUM OXIDE - ZRO2

No. 55.0400.27

HARDENED, STAINLESS STEEL - FE - CR

No. 55.0400.09

HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0400.08

GRINDING BALLS 30 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML

AGATE - SIO2 - POLISHED

No. 55.0300.05

SINTERED CORUNDUM - 99.7% AL2O3

No. 55.0300.06

SILICON NITRIDE - SI3N4

No. 55.0300.31

ZIRCONIUM OXIDE - ZRO2

No. 55.0300.27

HARDENED, STAINLESS STEEL - FE - CR

No. 55.0300.09

HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0300.08

GRINDING BALLS 20 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML

AGATE - SIO2 - POLISHED

No. 55.0200.05

SINTERED CORUNDUM - 99.7% AL2O3

No. 55.0200.06

SILICON NITRIDE - SI3N4

No. 55.0200.31

ZIRCONIUM OXIDE - ZRO2

No. 55.0200.27

HARDENED, STAINLESS STEEL - FE - CR

No. 55.0200.09

HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0200.08

GRINDING BALLS 15 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML

AGATE - SIO2 - POLISHED

No. 55.0150.05

SINTERED CORUNDUM - 99.7% AL2O3

No. 55.0150.06

SILICON NITRIDE - SI3N4

No. 55.0150.31

ZIRCONIUM OXIDE - ZRO2

No. 55.0150.27

HARDENED, STAINLESS STEEL - FE - CR

No. 55.0150.09

HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0150.08

GRINDING BALLS 10 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML

AGATE - SIO2 - POLISHED

No. 55.0100.05

SINTERED CORUNDUM - 99.7% AL2O3

No. 55.0100.06

SILICON NITRIDE - SI3N4

No. 55.0100.31

ZIRCONIUM OXIDE - ZRO2

No. 55.0100.27

HARDENED, STAINLESS STEEL - FE - CR

No. 55.0100.09

HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0100.08

GRINDING BALLS 5 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML

AGATE - SIO2 - POLISHED

No. 55.0050.05

ZIRCONIUM OXIDE - ZRO2

No. 55.0050.27

HARDENED, STAINLESS STEEL - FE - CR

No. 55.0050.09

HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0050.08

GRINDING BALLS ≤ 3 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML (100 G PACKAGE)

3 MM DIA. ZIRCONIUM OXIDE ZRO2

No. 55.0030.27

2 MM DIA. ZIRCONIUM OXIDE ZRO2

No. 55.0020.27

1.5 MM DIA. ZIRCONIUM OXIDE ZRO2

No. 55.0015.27

1 MM DIA. ZIRCONIUM OXIDE ZRO2

No. 55.0010.27

0.5 MM DIA. ZIRCONIUM OXIDE ZRO2

No. 55.0005.27

0.1 MM DIA. ZIRCONIUM OXIDE ZRO2

No. 55.0001.27

3 MM DIA. HARDENED, STAINLESS STEEL - FE - CR

No. 55.0030.09

1 MM DIA. HARDENED, STAINLESS STEEL - FE - CR

No. 55.0010.09

3 MM DIA. HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0030.08

1.6 MM DIA. HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0016.08

0.6 MM DIA. HARDMETAL TUNGSTEN CARBIDE - WC

No. 55.0006.08

SPECIAL ACCESSORIES

The Gas Pressure and Temperature Measuring System - GTM for continuous measurement of gas pressure and temperature directly in the grinding bowl turns the Planetary Mills PULVERISETTE 4, PULVERISETTE 5, PULVERISETTE 6 of the FRITSCH classic line into an analytical measuring system. 
For quickly and safely grinding in inert gas and for mechanical alloying classic line gassing lids are recommended. 
Certificate for IQ/OQ documentation is also available.

SELECT SPECIAL ACCESSORIES

GTM - GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM

GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM (GTM) INCL. 250 ML GRINDING BOWL

No. 50.2510.00

GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM (GTM) INCL. 500 ML GRINDING BOWL

No. 50.2540.00

ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANICAL ALLOYING - GASSING LID WITH VALVES AND SEAL RING FOR GRINDING BOWL 500 ML VOLUME

AGATE - SIO2, WITH STEEL CASING

No. 50.8010.00

SILICON NITRIDE - SI3N4 - WITH STEEL CASING

No. 50.9150.00

ZIRCONIUM OXIDE - ZRO2

No. 50.9100.00

HARDENED, STAINLESS STEEL - FE - CR

No. 50.8400.00

REPLACEMENT SEAL RING VITON FOR GASSING LID FOR AGATE BOWLS 500 ML VOLUME

No. 50.8013.16

REPLACEMENT SEAL RING VITON FOR ALL GASSING LIDS 500 ML VOLUME

No. 50.1230.16

ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANICAL ALLOYING - GASSING LID WITH VALVES AND SEAL RING FOR GRINDING BOWL 250 ML VOLUME

AGATE - SIO2 - WITH STEEL CASING

No. 50.8100.00

SILICON NITRIDE - SI3N4 - WITH STEEL CASING

No. 50.8900.00

ZIRCONIUM OXIDE - ZRO2

No. 50.8950.00

HARDENED, STAINLESS STEEL - FE - CR

No. 50.8500.00

HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING

No. 50.8600.00

REPLACEMENT SEAL RING VITON FOR GASSING LID FOR AGATE BOWLS 250 ML + 80 ML VOLUME

No. 50.2011.16

REPLACEMENT SEAL RING VITON FOR GASSING LID FOR SILICON NITRIDE BOWLS 250 ML VOLUME

No. 50.2010.16

REPLACEMENT SEAL RING VITON FOR GASSING LID FOR ALL OTHER BOWLS 250 ML VOLUME

No. 50.2230.16

ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANICAL ALLOYING - GASSING LID WITH VALVES AND SEAL RING FOR GRINDING BOWL 80 ML VOLUME

AGATE - SIO2 - WITH STEEL CASING

No. 50.8100.00

ZIRCONIUM OXIDE - ZRO2

No. 50.8840.00

HARDENED, STAINLESS STEEL - FE - CR

No. 50.8700.00

HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING

No. 50.8880.00

REPLACEMENT SEAL RING VITON FOR GASSING LID FOR AGATE BOWLS 250 ML + 80 ML VOLUME

No. 50.2011.16

REPLACEMENT SEAL RING VITON FOR GASSING LID FOR ALL OTHER GRINDING BOWLS

No. 50.4230.16

ADDITIONAL LOCK-SYSTEM

No. 90.1400.00

CERTIFICATION

IQ/OQ DOCUMENTATION (QUESTIONNAIRE FORMAT - IMPLEMENTATION NOT INCLUDED)

No. 96.0220.00

Alat Laboratorium Umum

Harga FRITSCH Planetary Mill PULVERISETTE 5/4 classic line

: Rp100
CV Andalan Prima Sejahtera adalah Supplier Laboratory Equipment, APPLICATION / INDUSTRY • Automotive • Aviation • Biodiesel • Bitumen, Asphalt & Waxes • Chemicals & Solvents • Cosmetics & Fragrances • Crude Oil • Edible Oils • Food & Beverage • Greases • Lubricants • Marine & Bunker Fuels • Paints and Varnishes • Petrochemicals • Petroleum • Pharmaceuticals • CATEGORY • ASTM Thermometers • Bitumens and Waxes • Certified Petroleum Standards • Flash Point • Fuels • General Test Equipment • Glassware • Lubricating Greases • Lubricating Oils • Metal Test Specimens • Penetration • Tribology • ViscosityKami Juga Memiliki Sebuah Web Online Anda Bisa Melakukan Belanja Online Semua Alat Laboratorium Di Website aww.andalanprimasejahtera.com . Disini Kami Menyediakan Semua Alat Lab / Alat Laboratorium Kimia, Alat Laboratorium Fisika, Alat Laboratorium Biology, Alat Laboratorium Bioteknology Dan Alat Laboratorium Lainnya.Untuk Informasi Dan Pemesanan Hubungi: CV ANDALAN PRIMA SEJAHTERAJl. Muhtar Tabrani. Perum Bintang Metropol Blok A-7 No 16- Bekasi , Indonesia Telpon: + 62-21-29253184, 021-29253187, Fax: 021-29253186 Mobile : 081382491575 / 081280842187 WA : 081290773137Email : andalan123@gmail.com Or support@andalanprimasejahtera.com

Kami Menjual
  • Astm Thermometer
  • Ndt Product /Hardness Tester
  • Oven
  • Ph Meter
  • Reagent /Chemial
  • Alat Testing Petroleum

Dapatkan penawaran terbaik untuk
FRITSCH Planetary Mill PULVERISETTE 5/4 classic line !

Nama
Quantity
Unit
Minta Penawaran

PERUSAHAAN TERKAIT

Verified Icon Verified
Response Rate 85%
Verified Icon Verified
Response Rate 65%
Verified Icon Verified
Response Rate 82%
IndoTrading.com adalah media iklan khusus Perusahaan, Toko, Distributor, Grosir, Agen, Supplier, Importir, Exportir, Trading dan Pabrik. Jika Anda tertarik untuk membeli FRITSCH Planetary Mill PULVERISETTE 5/4 classic line ini dengan harga murah, Mohon hubungi Kontak Perusahaan ini diatas.

Jika Anda adalah perusahaan yang ingin menjual di IndoTrading.com ,
Perusahaan
Andalan Prima Sejahtera

1 Tahun Perusahaan ini adalah Anggota Platinum Member Berbayar IndoTrading.com. Kami telah melakukan verifikasi Alamat dan Eksistensi Perusahaan ini.
Response Rate :
reply_all 86%
Perum. Bintang Metropol Jl. Jupiter VI , Blok A7 No 16 Bekasi Utara – Indonesia. 17122 Bekasi, Bekasi - Indonesia
Arrow