Jual GE Druck UPS-III IS Loop Calibrator for mA and V, intrinsically safe Harga Murah Bekasi oleh CV. Andalan Prima Sejahtera

GE Druck UPS-III IS Loop Calibrator for mA and V, intrinsically safe

  • Pembelian Minimum 1 unit
  • Negara Asal United States
  • KategoriLoop Calibrator
  • Update Terakhir31 Okt 2019

Spesifikasi GE Druck UPS-III IS Loop Calibrator for mA and V, intrinsically safe

GE Druck UPS-III IS Loop Calibrator for mA and V, intrinsically safe

  • Adjustable resolution & display contrast
  • Built-In 250 Ohm HART Resistor
  • Uses industry standard AA batteries
  • Battery voltage and battery low indicator
  • Information screen reports serial number, software version and calibration date
  • Primary reading in mA or %
  • Auto power off (enable or disable)
  • Pin protected, closed case calibration
  • Leather case with carry strap. (Note: the UPS III IS must be used in the case for hazardous area use.)

Graphic Display
The graphic display with menu-driven interface is easier to use than traditional knobs, switches, multi-function keys and dual key sequences.

Measure or Source 0 to 24 mA
An internal 24 V loop supply is available in both measure and source modes, essential during plant shutdowns.

Accuracy 0.01% of Reading
This includes 12 month stability and temperature effects. The UPS III can maintain a 4:1 calibration ratio with the latest instrumentation and is typically 20 to 80 times more accurate than a Digital Multi-Meter (DMM).

Simultaneous % Readout
Displays mA and the percentage value of 4 to 20 mA or 0 to 20 mA. The UPS III also converts mA readings to % flow. This is not possible with many loop calibrators.
 

GE-Druck-UPS-III-Simultaneous


Step, Span Check and Value Check
Step quickly through linearity tests and zero/span adjustments. In valve mode, seating can be checked and the positioner set.
 

Step Mode0%25%50%75%100%
4 to 20 mA linear48121620
0 to 20 mA linear05101520
4 to 20 mA flow4581320
0 to 20 mA flow01.25511.2520
4 to 20 mA span check4---20
0 to 20 mA span check0---20
4 to 20 mA valve3.8, 4, 4.2-12-19, 20, 21


Auto Step and Ramp
Outputs have adjustable rates (1 to 599 s) for single-handed loop testing, valve set-up and slew rate checks.

“Fast Set” Output
Allows values to be set to within 0.001 mA using the arrow keys. Holding a key quickly ramps the output to the next value. The system is ideal for alarm trip tests.

60 VDC Measurement
For loop diagnostics and maintenance of voltage output instruments.

Continuity and Switch Test Facility
This reduces DMM dependence when fault finding, checking loop integrity and testing switches.

EMC compliance to EN 61326-1
Complies with heavy industry standard. Most loop calibrators are only suitable for light industrial use.

Other Features

  • Adjustable display contrast
  • Adjustable resolution
  • Uses industry standard AA batteries
  • Battery voltage and battery low indicator
  • Information screen reports serial number, software version and calibration date
  • Primary reading in mA or %
  • Auto power off (enable or disable)
  • Pin protected closed case calibration
  • Optional protective over-boot with bench stand, hanging loop and quick connect belt clip
  • Optional AC line adaptor
  • Built-In 250 Ohm HART Resistor
Performance
FunctionRangeResolution1 year Accuracy 1
% rdg + counts
Remarks
Source mA24 mA0.0010.01% + 2V-max 75V
Source mA and 24V24 mA0.0010.01% + 2R-max 1 k Ω at 20 mA
Measure24 mA0.0010.01% + 2V-max mA 75V
Measure mA and 24V24 mA0.0010.01% + 2Rmeasure 15 Ω
Measure V60 V0.0010.02% + 4Rmeasure 1M Ω
Continuity< 100 Ω  1 mA current
1 Accuracy includes temperature effects 62°F to 80°F (17°C to 27°C). For use outside these limits add 0.0015%/°F (0.003%/°C).
Electrical
Power Supply4 x 1.5 V AA-size alkaline batteries (standard) or universal power supply
Battery Life75 hours in read mode, 18 hours at 12 mA
Auto Power Down30 minutes after last key press
Low Battery WarningBattery symbol displayed
Open LoopFlashes “open loop”
Loop Resistance HighFlashes “check loop Ω”
Out of RangeDisplays <<<< (under), >>>> (over)
Hart Resistor235 Ω menu selectable loop resistor
Environmental
Calibration Reference72°F (22°C) ±2°F(±3.6°C)/RH 45% ±15%
Operating Temperature14°F to 122°F (-10°C to 50°C)
Relative Humidity0% to 90% non-condensing
ConformityEN 61010, /EN 61326-1:1997 + A1:1998, CE marked
Physical
Housing MaterialHigh impact ABS
Dimensions (w x h x d)3 in x 5 in x 1 in (77 mm x 129 mm x 24 mm)
Weight9.7 oz (275 g) including batteries
DisplayGraphic LCD, 1.2 in x 2.1 in (31 mm x 54 mm)
Electrical TerminalsGold plated, 4 mm sockets

Loop Calibrator

Harga GE Druck UPS-III IS Loop Calibrator for mA and V, intrinsically safe

: CALL
CV Andalan Prima Sejahtera adalah Supplier Laboratory Equipment, APPLICATION / INDUSTRY • Automotive • Aviation • Biodiesel • Bitumen, Asphalt & Waxes • Chemicals & Solvents • Cosmetics & Fragrances • Crude Oil • Edible Oils • Food & Beverage • Greases • Lubricants • Marine & Bunker Fuels • Paints and Varnishes • Petrochemicals • Petroleum • Pharmaceuticals • CATEGORY • ASTM Thermometers • Bitumens and Waxes • Certified Petroleum Standards • Flash Point • Fuels • General Test Equipment • Glassware • Lubricating Greases • Lubricating Oils • Metal Test Specimens • Penetration • Tribology • ViscosityKami Juga Memiliki Sebuah Web Online Anda Bisa Melakukan Belanja Online Semua Alat Laboratorium Di Website aww.andalanprimasejahtera.com . Disini Kami Menyediakan Semua Alat Lab / Alat Laboratorium Kimia, Alat Laboratorium Fisika, Alat Laboratorium Biology, Alat Laboratorium Bioteknology Dan Alat Laboratorium Lainnya.Untuk Informasi Dan Pemesanan Hubungi: CV ANDALAN PRIMA SEJAHTERAJl. Muhtar Tabrani. Perum Bintang Metropol Blok A-7 No 16- Bekasi , Indonesia Telpon: + 62-21-29253184, 021-29253187, Fax: 021-29253186 Mobile : 081382491575 / 081280842187 WA : 081290773137Email : andalan123@gmail.com Or support@andalanprimasejahtera.com

Kami Menjual
  • Astm Thermometer
  • Ndt Product /Hardness Tester
  • Oven
  • Ph Meter
  • Reagent /Chemial
  • Alat Testing Petroleum

Dapatkan penawaran terbaik untuk
GE Druck UPS-III IS Loop Calibrator for mA and V, intrinsically safe !

Nama
Quantity
Unit
Minta Penawaran
IndoTrading.com adalah media iklan khusus Perusahaan, Toko, Distributor, Grosir, Agen, Supplier, Importir, Exportir, Trading dan Pabrik. Jika Anda tertarik untuk membeli GE Druck UPS-III IS Loop Calibrator for mA and V, intrinsically safe ini dengan harga murah, Mohon hubungi Kontak Perusahaan ini diatas.

Jika Anda adalah perusahaan yang ingin menjual di IndoTrading.com , Anda bisa mendaftarkan perusahan Anda disini
Kontak Supplier
Andalan Prima Sejahtera

Verified Supplier
1 Tahun Perusahaan ini adalah Anggota Diamond Member Berbayar IndoTrading.com. Kami telah melakukan verifikasi Alamat dan Eksistensi Perusahaan ini.
Response Rate :
90%
Perum. Bintang Metropol Jl. Jupiter VI , Blok A7 No 16 Bekasi Utara – Indonesia. 17122 Bekasi, Bekasi - Indonesia

Perusahaan Lainnya yang berkaitan dengan

PT. Raemulti Persada Dinamika

Verified Supplier
Indotrading gold member
1 Tahun
Response Rate 100%

PT Wijayamas Teknindo

Verified Supplier
Indotrading gold member
1 Tahun
Response Rate 86%

PT Tridinamika Jaya Instrument

Verified Supplier
Response Rate 100%
Arrow