Motor Timer H2C
DIN-sized 48 x 48 Motor Timer with Simple Operation for Switching Time Specifications
Three Motor Timers cover the wide time range of 6 s to 30 h with easy operation from the operation panel.
Five time specifications for each model with linked time display.
DIN-standard size of 48 x 48 mm.
Easily check operation with neon lamp.
Models with sockets and models with top wiring are also available.
Certified for UL and CSA safety standards.
Conforms to EN 61812-1 (except models that end with "-F") and CE Marking.
Five time ranges are available for each timer by turning the time range selector every 60 degrees.
Note:Rated time is displayed on the window.
Rated supply voltage
(motor and clutch) 24, 48, 100, 110, 115, 120, 200, 220, or 240 VAC (50/60 Hz) (see note)
Operating voltage range 85% to 110% of rated supply voltage
Power consumption 4.2 VA max. (3.96 W max.)
Reset voltage 10% max. of rated supply voltage
Reset time Minimum power-opening time: 0.5 s
Minimum pulse width: 0.5 s
Control outputs 6 A at 250 VAC, resistive load (cosΦ = 1)
Mounting method Flush mounting (except for H2C-F/-FR models), surface mounting, DIN track mounting
Note:The front panel of the timer is color coded to identify the following supply voltage classifications:
100 to 120 V: Blue
200 to 240 V: Red
Other classes: Black
Accuracy of operating time ±0.5% FS max. (±1% max. at 0.2 to 6 s for the time range code B or at 0.5 to 12 s for the time range code C)
Setting error ±2% FS max.
Reset time 0.5 s max.
Influence of voltage ±1% FS max.
Influence of temperature ±2% FS max.
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 2,500 VAC, 50/60 Hz for 1 min (between current-carrying and non-current-carrying parts)
2,000 VAC, 50/60 Hz for 1 min (between contact and control circuit and between contacts of different polarities)
1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts)
Vibration resistance Destruction: 10 to 55 Hz with 0.375-mm single amplitude for 1 h each in three directions
Malfunction: 10 to 55 Hz with 0.25-mm single amplitude for 10 min each in three directions
Shock resistance Destruction: 1,000 m/s2
Malfunction: 150 m/s2
Ambient temperature Operating: -10°C to 50°C
Storage: -25°C to 65°C
Ambient humidity Operating: 45% to 85%
Life expectancy Mechanical: 10,000,000 operations min. (under no load at 1,800 operations/h)
Electrical: 200,000 operations min. (3 A at 250 VAC, resistive load at 1,800 operations/h)
Motor life expectancy 20,000 h
Approved standards UL917, CSA C22.2 No.14.
Conforms to EN61812-1 and IEC60664-1 4 kV/1 (except for H2C-F models).
Output category according to EN60947-5-1 (except for H2C-F models).
EMC (except for H2C-F
models) (EMI): EN61812-1
Emission Enclosure: EN55011 Group 1 class A
Emission AC Mains: EN55011 Group 1 class A
Immunity ESD: IEC61000-4-2: 6 kV contact discharge (level 3), 8 kV air discharge (level 3)
Immunity RF-interference from AM Radio Waves: IEC61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)
Immunity Burst: IEC61000-4-4: 2 kV power-line (level 3), 2 kV I/O signal-line (level 4)
Immunity Surge: IEC61000-4-5: 1 kV line to line (level 3), 2 kV line to ground (level 3)
Case color Light gray (Munsell 5Y7/1)
Degree of protection IP40 (panel surface)
Weight H2C series: approx. 180 g
H2C-F series: approx. 270 g