Jual Pemadat aspal gyratory Harga Murah Jakarta oleh Geolabnemo

Spesifikasi Pemadat aspal gyratory

Pemadat Aspal metode Superpave - Gyratory compactor GYROCOMP

Merek : IPC/ControlsGroup – Italia

Kode Barang : 75-B0013/A; 75-B0014/A

Standard : EN 12697-10 | EN 12697-31 | AASHTO T312 | SHRP M-002 | ASTM D6925

Main Features :

  • High productivity, designed for continuous and heavy use
  • High rigidity thus lightweight due to the propriety orbital system
  • Compact and lightweight, also ideal for mobile laboratories
  • Very reliable and accurate
  • Certified to EN and AASHTO
  • Approved as Superpave™ Gyratory Compactor in U.S.A.
  • Integrated touch-screen control panel with large display
  • Sliding transparent door
  • Full safety and ergonomic design
  • Integrated electromechanical extruder option

General Description :

Introduction
Gyratory technique basically consists in a compaction of a bituminous mixture contained in a cylindrical mould with the simultaneous action of a vertical static compaction and of the shearing action resulting from the rotation of the mould on its inclined axis. The compaction data is measured and recorded during the test. GYROCOMP gyratory compactors, used for the past twenty years all over the world, are the reference point in terms of user-friendliness combined with reliability and ergonomics, and they have been produced in hundreds of units. Thanks to this experience Controls is introducing the third generation of gyratory compactors with the new GYROCOMP gyratory compactor. The new compactor includes and increases the advantages of the previous models.

Operating principle
The standards specify the method for compaction of cylindrical specimens of bituminous mixtures using a gyratory compactor, Such compaction is achieved by combining a rotary shearing action and a vertical  force applied by a mechanical head. The method can be used for:

  • The preparation of specimens of given height at a predetermined density, for subsequent testing of their mechanical properties;
  • The derivation of a curve density versus number of gyrations;
  • The void content for a given number of gyrations.

The standards apply to bituminous mixtures  (made both in laboratory or from work site sampling), with aggregates not larger than 37.5 mm.
During operation the bituminous mixture is contained within a cylindrical mould (100 or 150 mm dia.). Compaction is achieved by the simultaneous action of a low static compression and of the shearing action resulting in the motion of the centerline of the test piece, which generates a conical surface of revolution, while the ends of the test piece remain approximately perpendicular to the axis of the conical surface.

Description
Robust thus light high stiffness steel monocoque structure, incorporating pneumatic cylinder for vertical load application and electromechanical mechanism for the gyration system with exclusive mould rotation system, granting high accuracy and repeteability of test results, together with stiffness and angle stability values widely within the limits defined in EN 12697-31. Touch-screen user-friendly integrated control panel, large display showing the test graph in real time, on board firmware including 12 languages. Possibility to remote test control by PC. The software language can be defined making the interface suitable for any user needs.
The machine can be fit with the electromechanical extruder. See accessories.
The machine is supplied complete with Height calibration tool, PC software, air hose, operating instructions and calibration certificate.
Models preset to ASTM/AASHTO are supplied complete with traceable certificate of load, displacement and internal angle. Models preset to EN are supplied complete with traceable certificate of load, displacement and internal angle, including all the parameters required in EN 12697-31 Annex C (“stability factor”, “parallelism factor”, “full rotation factor”).

The Gyratory compactor GYROCOMP can be used as part of your Superpave performance based testing program.

Technical Specification :

  • Compacted specimen size: 150 and 100 mm dia.
  • Sample height: 80 to 200 mm (150 mm)-50 to 125 mm (100 mm)
  • Consolidation pressure: 80 to 800 kPa (150 mm) -160 to 1400 kPa (100 mm)
  • Internal angle of gyration: Adjustable from 0.70 to 1.40 °.
    Preset to 1.16° internal angle (78-PV2522,  ASTM/AASHTO models)
    Preset to 0.82° internal angle (78-PV2522/E,  EN models)
  • Speed of gyration: adjustable from 15 to 60 rpm
  • Number of gyrations: adjustable up to 999
  • Test programmable either by number of gyrations or specimen height
  • Communication with PC: RS 232 connections
  • Internal memory: thousands of tests
  • Power rating: 1000 W
  • Dimensions (including extruder bench, wxdxh): 502x753x1940 mm
  • Dimensions (wxdxh): 469x615x1130 mm
  • Weight approx.: 100 kg

Ordering Info :

78-PV2522  
GYROCOMP gyratory compactor, internal angle of gyration preset to 1.16° to AASHTO T312/ASTM D6925.
230-110 V, 50-60 Hz, 1 ph

Accessories :

Cylinder moulds and distance plates

78-PV0250/2 
Cylinder mould 150 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded. Complete with top and bottom plates.

78-PV0250/5 
Cylinder mould 100 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded. Complete with top and bottom plates.

78-PV0250/10
Cylinder mould 150 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates

78-PV0250/8
Cylinder mould 100 mm dia., special alloy steel hardened to 53-55 HRC, internally grinded, with holes for cold mix compaction. Complete with top and bottom plates

78-PV0250/3  
Distance plate, 150 mm dia., 50 mm high, for preparing short samples

78-PV0250/6  
Distance plate, 100 mm dia., 38 mm high, for preparing short samples

78-PV0250/4  
Accessories to compact 100 mm dia. specimens including 100 mm height calibration device

Integrated work top with extruder

78-PV2520/15  
Integrated work top with electromechanical specimen extruder. 230 V, 50-60 Hz, 1 ph

78-PV2520/15Z  
Integrated work top with electromechanical specimen extruder. 110 V, 60 Hz, 1 ph

Description 
The bench top with extruder fits the GYROCOMP perfectly resulting in an ergonomic solution that aids the operator. The Electromechanical 550 W motor with speed reducer produces a maximum load that is also suitable for cold mix specimens.

  • Dimensions: 502x753x808(h) mm
  • Weight approx.: 45 kg

78-PV0252/14  
Integrated work top with manual extruder

Air compressor

78-PV0250/7  
Low noise air compressor. 230 V, 50 Hz

78-PV0250/7Y  
Low noise air compressor. 220 V, 60 Hz

78-PV0250/7Z  
Low noise air compressor. 110 V, 60 Hz

Description
10 bar max. pressure, 130 l/min air delivery, 10 l cap., power rating 750 W, silent operation (less than 59 dB, ISO 3744, r=4 m).

  • Overall dimensions (wxdxh): 370x410x650 mm
  • Weight approx.: 27 kg

Internal Angle Measurement Apparatus ILS
78-PV0255

 

Kategori : Alat uji Aspal

Price : Call For Info

Yudhistira

Hp. 0811 188 6845;

 – 0818 0816 0634(WA)

Email : naysite2@gmail.com;

Harga Pemadat aspal gyratory

: CALL
Lebih Dari 40 Tahun Lebih Kami Menjadi Supplier Peralatan Pengujian Material Konstruksi Untuk Keperluan Peralatan Konstruksi Gedung, Jalan, Jembatan, Bendungan, Dan Konstruksi Teknik Sipil Lainnya, Khusus Untuk Peralatan Kualitas Tanah, Beton, Aspal, Batuan Dan Material Konstruksi Lainnya.Kami Menjadi Agen Resmi Dari Beberapa Merek Yang Sudah Dikenal Di Dunia Dalam Bidangnnya Untuk Material Konstruksi Dan Juga Instrumentasi Pengawasan Pergerakan Lahan, Cuaca, Dsb..Beberapa Merek Yang Kami Agenkan Antara Lain : Controls &Ndash; Italia ( Alat Pengujian Laboratorium Dan Lapangan Untuk Material Konstruksi) ; Slope Indicator &Ndash; Usa ( Instrumentasi Yang Digunakan Untuk Mengawasi Pergerakan, Penurunan, Deformasi Lahan) Untuk Menunjang Perencanaan Bangunan Yang Effisien; Hydrological Services; Australia ( Instrumentasi Pemantauan Cuaca) ; Unidata; Australia ( Instrumentasi Pemantauan Cuaca Dengan Telemeteri System) ; Nikon &Ndash; Japan ( Microscope) , Dsb.

Kami Menjual
  • Alat Laboratorium (Civil Engineering
  • Petroleum
  • Industrial
  • Life Science)
  • Perangkat Uji Constant
  • Alat Rotary Evaporator

Dapatkan penawaran terbaik untuk
Pemadat aspal gyratory !

Nama
Quantity
Unit
Minta Penawaran
IndoTrading.com adalah media iklan khusus Perusahaan, Toko, Distributor, Grosir, Agen, Supplier, Importir, Exportir, Trading dan Pabrik. Jika Anda tertarik untuk membeli Pemadat aspal gyratory ini dengan harga murah, Mohon hubungi Kontak Perusahaan ini diatas.

Jika Anda adalah perusahaan yang ingin menjual di IndoTrading.com , Anda bisa mendaftarkan perusahan Anda disini
Kontak Supplier
Geolabnemo

Verified Supplier
2 Tahun
Response Rate :
50%
Jl. Abdul Muis No. 36Q - Tanah Abang Jakarta Pusat, DKI Jakarta - Indonesia

Perusahaan Lainnya yang berkaitan dengan

CV. Cahaya Raga Mandiri

Verified Supplier
Response Rate 100%

PT Rohartindo Nusantara Luas

Verified Supplier
Response Rate 100%

PT Inovatif Teknik Mesindo

Verified Supplier
Response Rate 100%
Arrow