Penetrometer Digital H-1240D.4F Humbolt
ASTM D5; AASHTO T49, IP49; ASA Std., A37.1; Fed Spec. SS.R. 406C, Meth.214.01
Waxes with 250 or less penetration
Joint sealant for asphalt & concrete pavements
ASTM D217, D937 ASA Std. Z11.3
For all 90° cones
Food products and paste paints
U.S. Dept. Of Agriculture
( shortenings, margarine, butter, etc.) Measuring firmness of solid and plasticized fats
AOCS Cc 16-60
( i.e., recovery of used grease ) Small obtainable samples
Standard hardened stainless steel needle, 40-45 mm exposed needle length. Wt. 2.5 g.
Same as H-1280. Certified to ASTM accuracy by independent laboratory. Wt. 2.5 g.
Same as H-1290. Certified to ASTM accuracy by independent laboratory. Wt. 2.5 g.
Long hardened stainless steel needle, 50-55mm exposed needle length. Wt. 2.5 g.
Hardened stainless steel wax blunt tip of truncated cone. Ferrule is approx. 3.2 mm dia. Wt. 2.5 g.
Same as H-1310. Certified to ASTM accuracy by independent laboratory.
Hardened stainless steel tip with special plunger. Total wt. 60 g ± .050 g.
Resilience ball penetration tool. Total wt. 27.5 g.
Hollow 90° brass cone, highly polished stainless steel tip. Removable nut and stem. Wt. 102.5 g.
Same as H-2520, completely made of stainless steel. Wt. 102.5 g.
Stainless steel replacement tip, nut and stem.
Magnesium cone and plunger, same dim. as H-2520. Total wt. cone and plunger 30.0 g.
Aluminum. Same dimension as H-2520. Total wt. 35 g.
10° aluminum cone, 3.2 mm ferrule,0.8 mm stainless steel blunt tip. Overall length 106 mm. Wt. 45 g.
¼ scale. ( Not considered a substitute for full-size cone specified in ASTM D217. ) Wt. 9.38 g