Jual VALVE READYFOR USE IN ( IN STOCK) Harga Murah Sidoarjo oleh CV. Java Tech-Seal

VALVE READYFOR USE IN ( IN STOCK)

  • Pembelian Minimum 1
  • stock212
  • Negara Asal Indonesia
  • KategoriKatup Valve
  • Update Terakhir06 Jun 2015

Spesifikasi VALVE READYFOR USE IN ( IN STOCK)

KAMI MENJUAL BARANG-BARANG TEKNIK TERDIRI DARI :

GATE VALVE RESING, GATE VALVE NON RESING, BALL VALVE, GLOBE VALVE, VALVE ND, CHEK VALVE,
STRAINERS, STEAM TRAP , KONTROL VALVE, PRESSURE REDUCING VALVE, AIR VALVE, BUTTER FLY
DOOR LOCK, SARANGAN, TEE PIPE, KRAN MIRING , KRAAN KODOK, KNIE VALVE, P L U G K R A N.
BALL VALVE, POMPA SREW STAINLESS STEEL, LIQUID METER , FORGED STEEL TYPE GATE
FORGED STEEL + FLENDES, ROOT BLOWER, CONTROL VALVE, KNIFE GATE VALVE, PNEUMATIC POSITIONER,
PNEUMATIC D/ P CELL TRANSMITER, NAPCO AP. VALVE FCD, FLOW METER,

SEMUA DENGAN VARIABLE UKURAN, MATERIAL, MERK
BARANG DALAM STOCK

valve' s stock consists of:

Gate Valve Resing Ø 1” , SELLA, 1 – 1500, Steel, 1 pc

Gate Valve Reasing Ø 1½ , SELLA , 1500 – Steel, 8 pc, PN 65 Steel -1 pc, SELLA 10 K 1500 Steel -1 pc, 1500 – Steel -1 pc

Gate Valve Resing Ø 2” ,
MALLABLE, 10 k – 150, 8 pc
KTM, DVC – 150, 1 pc
WN, 150 – Steel, 1 pc
TOYO, 150 – WCB, 1 pc
SUFA, 150 – WCB, 1 pc
MS, 150 – LCB, 1 pc
KITZ, 150 – Steel, 2 pc
KITZ, 10 K – 50, 3 pc
NBC, 10 K – 50 , 1 pc
TRADE MARK, 1 pc
10 K – 50, 3 pc
KAISER, 10 K – 50FC, 1 pc
“ H” , 10 K – 50, 2 pc
TV , 10 K – 50, 1 pc
FACIFIC , 150 – Steel, 1 pc

Gate Valve Resing Ø 2”
KITZ, 300 – WCB, 4 Buah
VELLAN 2-600 Steel WCB, 6 Buah
MCI, 300 – Steel, 1 Buah
CL, 300 – Steel, 1 Buah
MM, 300 – Steel, 1 Buah
MM, 600 – Steel, 1 Buah
KS, 600 – Steel, 1 Buah
S, 600 – Steel WCB, 1 Buah
PV, 300 – Steel, 1 Buah
IPP, 300 – Steel , 1 Buah
YONEKI 150 – Steel, 1 Buah
HEATON, 300 – Steel, 1 Buah
CRANE 300 – Steel, 1 Buah
TOYO, 300 – Steel, 1 Buah
600 – Steel WCB, 1 Buah
150 – Steel LCB , 1 Buah

Gate Valve Non Resing Ø 2”

TG, Low Pressure ( gray) , 8 Buah
HE, Low Pressure ( gray) , 13 Buah
PANAH, Low Pressure ( gray) , 2 Buah
GK, Low Pressure ( gray) , DN 50 , 1 Buah
SM, Low Pressure ( gray) , PN 10, 1 Buah
SAPAG, High Pressure , 1 Buah,
Steem : CR 13, Class : 1500
Seat : CR 13, Body : A 105
Disc : CR 13, Type : CR 7412 R

PHOCENE High Pressure ( Steel) , 6 Buah
Steem : F.6 Class : 1500
Seat : F.6 Body : A.105
Disc : FS Type : GL

Gate Valve Resing Ø 2½
MALLABLE, 150 , 1 Buah
JTS, 65, 1 Buah
DARLING, 200 – Steel, 1 Buah
CRANE, 300 – Steel, 1 Buah
SELLA , 1500 – Steel, Buah

Gate Valve Non Resing Ø 2½
MTV, Tekanan rendah, 1 Buah
PANAH, Tekanan rendah, 1 Buah
TOYO, 10 K – 65, 10 Buah

Gate Valve Resing Ø 3 "
MM, S 50, 1 Buah
DCI, 10 K – 80, 2 Buah
- , 10 K , 1 Buah
- , PN – 16, 2 Buah
ECON , PN 5 – 80, 1 Buah
SELLA , 300 – Steel , 3 Buah
SELLA , 600 – Steel , 1 Buah
CRANE, 1735 125 – Steel , 1 Buah
CRANE, 150 – Steel WCB, 2 Buah
PV, 300 – Steel LB, 1 Buah
GS, 80 ND6 C25 MAW 0601000, 1 Buah
VELLAN, 600 – Steel, 1 Buah
- , 600 – Steel , 1 Buah
KITZ, 10 K – 80 FCD-S, 2 Buah
KITZ, 150 WCB, 3 Buah
KITZ, 10 K , 1 Buah
RED WHITE, 1 Buah

Gate Valve Non Resing Ø 3 "
HE, Tekanan Rendah, 2 Buah
VAG, Tekanan Rendah, 1 Buah
PANAH, Tekanan Rendah , 8 Buah
SM, Tekanan Rendah, 3 Buah
TOYO , 10 K – 80, 5 Buah
- , DN 80 – PN 6, 1 Buah
- , ND 16 GGL MAW ( Abu-abu) , 1 Buah

Gate Valve Resing Ø 4 "
GKS, 150 – WCB, 1 Buah
KITZ, 150 – WCB, 3 Buah
KITZ, 300 – Steel, 1 Buah
J, 150 – WCB, 1 Buah
JIS, 10 K – 100, 1 Buah
-, NBC 10 K – 100, 1 Buah
MM, S 150 A 126 WCB, 3 Buah
DIKKERS, 150 – Steel, 1 Buah
AIL, 150 – WCB, 1 Buah
CRANE, 150 – Steel WCB , 1 Buah
POWEL, 150 – Steel WCB , 1 Buah
" - " , 150 – Steel , 2 Buah
YONEKI, 300 – Steel WCB, 2 Buah
WW, 300 – Steel WCB, 1 Buah
PK, 300 – Steel WCB, 1 Buah
SG, 600 – Steel, 1 Buah
" - " , 600 – Steel, 1 Buah

Gate Valve Non Resing Ø 4Ý
KITZ, 10 K FC, 1 Buah
G, 150 ( Abu-abu) , 1 Buah
HE, ( Abu-abu) , 1 Buah

Gate Valve Resing Ø 5 "
KITZ, 10 K – 125, 2 Buah
, 10 K – 125 NBC, 1 Buah
MSA, Steel, 1 Buah

Gate Valve Non Resing Ø 5”
TOYO , 10 K – 125, 3 Buah
KITAZAWA, 10 K – 125, 1 Buah
HE, ( Abu abu) , 1 Buah

Gate Valve Resing Ø 6 "
KITZ, 10 K – 150, 1 Buah
KITZ, 150 – Steel WCB, 1 Buah
CRANE, 150 – Steel WCB, 2 Buah
POWEL, 150 – Steel, 1 Buah
RICHARDS, 125 – Steel, 1 Buah
S , 150, 1 Buah
ORION, 300 – Steel, 1 Buah
- , 600 – Steel, 2 Buah
- , 10 K – 150, 2 Buah
KITZ , 150 WCB, 14 Buah

Gate Valve Non Resing Ø 6 "
TOYO, 10 K – 150, 1 Buah
, 10 K – 150, 2 Buah
PANAH, Low Pressure ( gray) , 2 Buah
TG , DN 150 10K ( gray) , 1 Buah
VAG , ND 40 GS, 1 Buah

Gate Valve Resing Ø 8 "
POWEL, 300 – Steel, 2 Buah
NS , 600 Lb WCB, 1 Buah
- , PN 25 – Steel 200 WCB, 1 Buah
ROOT , 10 K – 200, 4 Buah
- , 150 – Steel WCB, 1 Buah
TOYO , WCB Red White 300, 1 Buah
KITZ , 10 K – 200, 1 Buah

Gate Valve Non Resing Ø 8 "
TOYO , 10 K – 200, 2 Buah
GK , Low Pressure , 1 Buah
HE , Low Pressure , 10 Buah
CRANE, STEEL 300, 1 Buah

Gate Valve Resing Ø 10 "
TOYO, 150 – Steel, 1 Buah
TOYO , 10 K – 250 JIS, 1 Buah
KITZ , 10 K – 250 FC, 1 Buah
ORION, 10 – 300 steel, 1 Buah
KVC, ANSI 600 Body : WCB Steam F6A, 1 Buah

Gate Valve Non Resing Ø 10 "
- , 10 K ( Low pressure) , 1 Buah
KITZ , 10 K, 14 Buah
- , PN 10 – 250 ( Abu-abu) , 1 Buah

MACAM MACAM UKURAN

GATE VALVE RESING
Merk HVK, Ø 12” , 10 K – 300, 2 Buah
Merk Jenkins, Ø 12” 150 STEEL WCB, 1 Buah
Merk BD, Ø 12” 12 A, 1 Buah
Merk, Ø 12” 150 ECB ( semi Gearbox) , 1 Buah
Merk VAG, Ø 14Ý , M.350 ND 2, 5, 1 Buah
Merk KITZ, Ø 16” , 150 Steel WCB, 1 Buah
Merk MM, Ø 16” , 150 Steel WCB, 1 Buah
Merk VAG, Ø 18Ý , M 450 ND 2.5, 1 Buah
Merk LQ, Ø 18 " , 150 WCB ( semi Gearbox) , 2 Buah
Ex BOMA, Ø 20 " , ( Semi Gearbox) Abu-abu, 2 Buah

GATE VALVE NON RESING
Merk TOYO, Ø 12 " , 10 K 250 JIS, 1 Buah
Merk HE, Ø 12 " , 10 K, 2 Buah

B A LL V A L V E

BALL VALVE Ø 1 "
NPT, 10 K, 1 Buah

BALL VALVE Ø 2 "
KITZ, 20 K FCD 3, 1 Buah
YONNE, 150 – WCB, 2 Buah

BALL VALVE Ø 3 "
KITZ, 10 K, 1 Buah
KITZ, 150 – Steel, 1 Buah
ZITE, 10 K, 1 Buah
KTM, 10 K – 80 FC, 1 Buah
KVC, 150 – WCB, 1 Buah
RICARDS, DN 80 11-150 Steel, 1 Buah
TXT ( Texas Team) Steel, 1 Buah
-, 150 – 3, 1 Buah

BALL VALVE Ø 4 "
KITZ, 10 K – 100, 1 Buah
HISAKA, 40 K-100, 1 Buah

BALL VALVE Ø 5 "
KITZ, 10 K, 1 Buah

BALL VALVE Ø 10 "
WKM, 10 – 600 AFC, 1 Buah

G L O B E V A L V E

GLOBE VALVE Ø ¾ "
KITZ, 10 K– 20, 2 Buah
MALLABLE, 10 K– 20, 1 Buah

GLOBE VALVE Ø 1 "
MALLABLE, 160 – 1, 1 Buah
Mallable, 20 K, 1 Buah

GLOBE VALVE Ø 1½ "
KITZ, 10 K– 40, 2 Buah
MALLABLE, 10 K– 40, 5 Buah
MALLABLE, 20 K– 40, 1 Buah
LINNED, 885, 3 Buah
DUCTILE, 10 K– 40, 1 Buah
, 20 K– 40, 4 Buah

GLOBE VALVE Ø 2 "
CRANE, LCB 300 – Steel, 2 Buah
KITZ, FCD 5 10 K, 2 Buah
FACIFIC , Steel, 1 Buah
D, 50 – WHB, 1 Buah
DUCTILLE, 20 K– 50, 1 Buah
MALLABLE, 20 K– 50, 1 Buah
ST , 20 K– 50, 1 Buah
- , gray, 1 Buah

GLOBE VALVE Ø 2½ "
ST, 20 K– 65, 1 Buah

GLOBE VALVE Ø 3 "
ST, 20 K– 80, 4 Buah
TOYO, 150 – WCB, 1 Buah
FUJI, 10 K– 80, 1 Buah
PK, 300 S – WCB, 1 Buah
MCI, 10 K – 80, 1 Buah
-, 20 K – 80, 2 Buah
-, TK 8 – 304( stang biru) , 1 Buah
MALLAELABLE, 20K – 80, 1 Buah

GLOBE VALVE Ø 4 "
ST, 20 K – 100, 4 Buah
TRIANGLE, 200 30400 – WCB, 1 Buah
VELLAN, 150 – Steel WCB, 1 Buah
-, 10 K – 100, 1 Buah
GLOBE VALVE Ø 5 "
, 10 K – 130 150 LB, 1 Buah

GLOBE VALVE Ø 6 "
HK, 20 K – 150 PHZ, 2 Buah
KUPU KUPU, 20 K– 150 PHZ IH 708, 1 Buah
ST, 20 K – 150, 1 Buah
DCI, 20 K – 150, 2 Buah
-, 20 K – 150, 6 Buah

GLOBE VALVE Ø 8 "
KITZ, 10 K – 200, 1 Buah
-, 10 K – 200, 4 Buah

V A L V E N D

VALVE ND Ø ½ "
-, ND - 25 ( gray) , 2 Buah

VALVE ND Ø ¾ "
-, ND – 16, ( gray) , 4 Buah
ND – 25, ( Blue) , 8 Buah

VALVE ND Ø 1 "
-, ND – 16( Blue) , 8 Buah
-, ND – 16( gray) , 2 Buah

VALVE ND Ø 1¼ "
-, ND – 16, ( Blue) , 3 Buah

VALVE ND Ø 1½ "
KLINGER, ND – 40 ( Blue) , 1 Buah
- , PN – 25, ( Blue) , 1 Buah
- , PN – 40, ( Blue) , 1 Buah
- , ND – 40, ( Blue) , 5 Buah

VALVE ND Ø 2 "
-, ND – 16 ( gray) , 9 Buah
-, ND – 25 ( Blue) , 10 Buah
-, ND – 25 ( white) , 2 Buah

VALVE ND Ø 2½ "
KSB, ND – 40, ( Blue) , 1 Buah
MAW, ND – 40, ( Blue) , 1 Buah
PAW, ND – 25, ( Blue) , 1 Buah
- , P – 40, ( Blue) , 1 Buah
-, ND – 16 ( gray) , 2 Buah
-, ND( Blue) , 3 Buah

VALVE ND Ø 3 "
-, ND – 16( gray) , 7 Buah

VALVE ND Ø 4 "
CAVO, ND – 16, ( gray) , 1 Buah
S, ND – 16 ( gray) , 2 Buah
D, 100, ( gray) , 1 Buah
MM, S-150 A216 WCB, ( white) , 1 Buah
ND( Blue) , 1 Buah
RRT, PG.16 100, ( gray) , 1 Buah
-, PN.16, ( gray) , 1 Buah

VALVE ND Ø 5 "
GG – 25, ND – 16, ( Gray) , 1 Buah
BGG, 403 PN-16 125( Gray) , 1 Buah
ARI, GS-C 25 ND 25 ( Blue) , 1 Buah
² , ND – 25/ 40, ( Blue) , 1 Buah
-, ND – 25, ( Blue) , 1 Buah

VALVE ND Ø 6 "
MM, S 150 A216 WCB, ( white) , 1 Buah
- , ND – 40, ( Blue) , 2 Buah
- , P 16 150, ( Gray) 1 Buah
- , PN 16 150, ( Gray) , 2 Buah
- , PC 16 150 , ( Gray) , 1 Buah

VALVE ND Ø 8 "
GS, PN – 40 200 C25, ( Blue) , 1 Buah
-, ND – 40 ST NW200, ( Blue) , 1 Buah
KLINGER, KV-I 200 PN 40, ( Blue) , 1 Buah

VALVE ND Ø 12Ý
ARI, ND 16 GG 25 – 300 ( Gray) , 2 Buah

KNIE ND MACAM-2 UKURAN
GAVO, ND 16 GG, Ø ¾ " , Gray, 1 Buah
- , -, Ø 1 " , Gray, 1 Buah
- , ND 16 GG, Ø 1½ " , Gray, 1 Buah
Ex RRT, N 462, Ø 1½ " , Gray, 1 Buah
- , GE 82463 114, Ø 1½ " , Gray 2 Buah
- , ND 16 GG, Ø 2” , Gray, 1 Buah

CHEK VALVE

CHEK VALVE Ø ¾ "
-, Type ND D4 C25 ( Blue) , 1 Buah

CHEK VALVE Ø 1 "
-, Type ND ND-16 ( Gray) , 3 Buah

CHEK VALVE Ø 1¼ "
-, Type ND D4 25, ( Blue) , 1 Buah
-, Type ND ND-16 ( Gray) , 2 Buah

CHEK VALVE Ø 1½ "
-, Type ND DA C25, ( Blue) , 3 Buah
-, Type ND ND 16 Steel ( Blue) , 1 Buah

CHEK VALVE Ø 2 "
WALL WORTH, 125 S 200, ( white) , 1 Buah
JIMS, C1001 10K Steel, ( white) , 1 Buah
-, Type ND DA C25, ( Blue) , 1 Buah
-, Type ND ND 16 ( Gray) 4 Buah

CHEK VALVE Ø 2½ "
-, Type ND ND 16 ( gray) , 1 Buah

CHEK VALVE Ø 3 "
SHOWA, 10 k – 80, ( Gray) , 1 Buah
KITZ, 10 K – 80, ( Gray) , 3 Buah
VW, 10 K, ( Biru) , 1 Buah
-, Type ND N 237 ( gray) , 8 Buah
-, Type ND DA C25( Biru) , 1 Buah
CRANE, WCB STEEL 150, 38 Buah

CHEK VALVE Ø 4 "
POWEL, 125 – WSP, 2 Buah
SUN, 1 Buah
KITZ, 10 K – 100, 2 Buah
IOC, 125, 2 Buah
HE, Tekanan rendah, ( Gray) 1 Buah
CRANE, STEEL WCB 150, 26 Buah

CHEK VALVE Ø 6 "
KITZ, 10 K – 150 S, 1 Buah
SHOWA, 10 K – 150, 1 Buah
848, 10 K, 1 Buah
-, Type ND ND 25, ( gray) , 1 Buah
DIKKERS, 6 – 150, STEEL, 1 Buah
POWELL, 125 WCB, STEEL, 1 Buah
CRANE, STEEL WCB 150, 1 Buah

CHEK VALVE Ø 8 "
KITZ, 10 K-200 S, 1 Buah
CRANE, 150 – Steel WCB, 4 Buah
DIKKERS, 150 – Steel 2332, 8 Buah
RING, 10 K, 3 Buah
-, Steel WCB, 1 Buah
-, 125 – LB, 1 Buah

CHEK VALVE Ø 10 "
POWEL, 125 – WSP, 1 Buah
ROCK, 125 - Steel , 1 Buah
I, WCB 150, 1 Buah

CHEK VALVE Ø 12 "
ROCK, 125 – Steel, 2 Buah
HE, 125, 1 Buah

STRAINERS
-, 10 K – 50, Ø 2 " , 1 Buah
KITZ, 10 K - 65, Ø 2½ " , 1 Buah
-, 10 K – 65, Ø 2½ " , 1 Buah
TOYO, 10 K, Ø 3 " , 1 Buah
B, CHAS M BALLEY, Ø 3” , 1 Buah
FEBCO, , 200 F RWWP 175 Ø 4” , 1 Buah
TOYO, 10 K, Ø 4 " , 1 Buah
PSA, Ø 6” , 1 Buah
KS, Ø 6Ý , 1 Buah
TAYLOR, Ø 6Ý , 1 Buah
KITZ, Ø 8Ý , 2 Buah
NP 40, Ø 8Ý , 1 Buah
ROCK, 10 K, Ø 10” , 1 Buah
ROCK , 10 K, Ø 12” , 1 Buah

STEAM TRAP Model SI-T3 MPO 3-16 Kg/ Cm² , 4, 5 ~ 235 Psi Max Temp 220º
Size, Ø 1¼ " + Flens 16K – 32A, 1 Buah
Size Ø 1½ " + Flens DN 40 JIS 10K, 1 Buah
Size, Ø ½ ” MIYAWAKI S 30 15 A, 1 Buah

KONTROL VALVE
Merk Taylor, Ø ½ " , 1 Buah
Merk Taylor , Ø ¾ ” , 1 Buah
Merk Gestra Patent, Ø 2” DN 6-16 GG, 2 Buah
Merk -, Ø 6Ý , 1 Buah

PRESSURE REDUCING VALVE
Merk YOSHITAKE Ex Japan GP 1000, Fluid: Steam, Inlet Press: Max. 1, 0 MPS
Temp: 220º C, Reduced Press: 0, 05 – 0, 5 MPS, size Ø 1” , 2 Buah

AIR VALVE
Merk SPIRAX SARCO Fig. 33 PN 16 Ø 2” , 1 Buah

BUTTER FLY
Merk ECON , 16 Bar, Ø 2½ " , 7 Buah
Merk -, Ø 3Ý , 1 Buah
Merk AER, Ø 4” , 2 Buah
Merk -, Ex France, Ø 4” , 5 Buah
Merk LUNKENHEIMER Ex. USA , Ø 4” , 1 Buah
Merk VIA GmbH DN 125 PN16 Ps10, Ø 5” , 1 Buah
Merk DE ZURIK, Ø 6” , 1 Buah
Merk INTERVALVE , Ø 6” , 1 Buah
Merk DENCO, Ex USA ( hijau) , Ø 8” , 2 Buah
Merk TVF SKIN Model WGO, Ø 8Ý , 5 Buah
Merk KEYSTONE Ratio 30 : 1, Ø 8Ý , 1 Buah
Merk TOMOE PATO 300A SCS 13, Ø 12´ , 1 Buah
Merk , Ø 12Ý , 6 Buah
Merk ECON , Ø 14” , 15 Buah
Merk V, Ø 16” , 4 Buah
Merk V, Ø 18” , 2 Buah
Merk V, Ø 20” , 1 Buah

DOOR LOCK 38/ 294-1, Ø 1½ " , 3 Buah
38/ 295-1, Ø 2” , 7 Buah
38/ 585-1, Ø 3” , 4 Buah

SARANGAN
Merk - , A 50 DIN 6613 Ø 2” ( Abu-abu) , 2 Buah
Mertk WELLER, 150 STEEL, Ø 4” ( Putih) 2 Buah
Merk B, SF ALIF, Ø 4” ( Putih) , 2 Buah
Kran Miring merk ESPERO, 16 K 140 FC, Ø 1½ " , 2 Buah
Kran Miring, ( gray) , 2 Buah
Kran Kodok, Ø 2” , 1 Buah
Knie Valve, 20 K 65 SC, Ø 2½ " 1 Buah

TEE PIPE ( PIPA TEE )
UkuranØ 5½ " x Ø 5 " ( Biru) 2 Buah
UkuranØ 5½ " x Ø 5 " ( Hijau) 1 Buah

P L U G K R A N.
NEWMAN WILLI KEN, Ukuran Ø 2” 201 M 20C WOG, 1 Buah
AUDCO, size Ø 3” , 1 Buah
DRP, size, Ø 3” , S& B 80 ( gray) , 1 Buah
ROCK WELL, size Ø 3” , 1 Buah
ECON, size Ø 4” 100, 1 Buah
AUDCO, size Ø 4” 150 Ex England, 1 Buah
EMCO, size Ø 4” Rockwell Nordstrom, 7 Buah 175 WCP ( Hitam)
-, size Ø 4Ý , ( Type Prapatan) , 1 Buah
ROCK WELL, size Ø 4” Nordstrom 400 WOG 2 Buah
AUDCO, size Ø 6” 6272 B 175 WOG, 1 Buah
B, size Ø 6” 10 K – 160 ( Hitam) , 3 Buah
ROCK WELL , size Ø 6” 200 WOG, 1 Buah
ACF, size Ø 6” 200 , 1 Buah

BARANG BARANG TEKNIK
BAHAN : STAINLESS STEEL

BALL VALVE SS Ø ½ "
KTM, 10 K – 15, 2 Buah
V, 10 K – 15, 1 Buah

BALL VALVE SS Ø ¾ "
KTM, 10 K – 20 150 E 4300, 1 Buah
KTM, 10 K – 300 E 0106, 1 Buah
KTM, 10 K – 20, E 0600, 4 Buah
KITZ, 10 K – 20, 1 Buah

BALL VALVE Ø 1 "
ROYAL, 10 K, 1 Buah
KITZ, 10 K, 2 Buah
ICKI, 10 K, 1 Buah
YONNE, 10 K, 1 Buah
BAC, 25 – PN 40, 2 Buah
NDV, 10 K – E 100 N, 1 Buah
NPT, 10 K, 1 Buah
" N " , 10 K – 715, 1 Buah
ONTA, 10 k – 25 SCS 13, 1 Buah
KTM, 20 K – 25 E 0106 SCS 13, 1 Buah
KTM, 10 K – 25 E 0600 SCS 13 , 12 Buah
HISAKA, 10 K – 25 HF 3, 1 Buah
BUNGA, 10 K – 25 SCS 13, 1 Buah

BALL VALVE Ø 1½ "
KTM, 10 K – 40 0601 SCS 14, 1 Buah
KTM, 10 K – 40 0600 SCS 13, 1 Buah
KTM, 10 K – 40 E 6308 SCS 13, 2 Buah
YONE, 32 A – SCS 13, 1 Buah
TOYO, 10 K – 40 SCS 13, 1 Buah
SAM, 10 K – 40 80 SCS 13, 1 Buah
SS, 10 K – 40 A SCS 13, 1 Buah
“ N” , 10 K – 40 715 SCS 13, 2 Buah

BALL VALVE Ø 2 "
KTM, 10 K – 50 E 0600 SCS 13, 1 Buah
KTM, E 0106 2-300 CF 8 SCS 13, 1 Buah
“ -“ , 10 K, 1 Buah

BALL VALVE Ø 2½ "
OKIVA, 10 K – 65 SCS 13, 1 Buah
NPT, 10 K – 65 SCS 13, 1 Buah
LS, 10 K – 65 SCS 13, 1 Buah
“ V” , 20 K – 65 SCS 13, 1 Buah
DS, 10 K – 65A SCS 14, 1 Buah
“ – “ , 10 K – 65 A SCS 316, 1 Buah

BALL VALVE Ø 3 "
KTM, 10 K – 80 E 600B SCS 13, 1 Buah
“ V” , 150 – 3 SCS 13, 1 Buah

BALL VALVE Ø 4 "
KTM, 10 K – 100 SCS 13, 1 Buah
KTM, 10 K – 100 SCS 13.A, 1 Buah

BALL VALVE Ø 5”
KTM, 10 K – 125, SCS 13, 1 Buah
IWATZU, 10 K – 125 SUS 304 HB 88, 1 Buah
“ W” , 10 K – 125 CF 8, 1 Buah

BALL VALVE Ø 6”
KTM, 10 K – 150, SCS 13, 1 Buah

CHEK VALVE STAINLESS
SH, 10 K-50 SCS 13, Ø 2Ý , 1 Buah
ZF, 10 K– 50 CF 8, Ø 2Ý , 1 Buah

G A T E V A L V E
Gate Valve Stainless Steel, Ø ½ " merk O 150 SCS 14, 1 Buah
Gate Valve Stainless Steel, Ø ¾ " merk “ N” SCS 13, 1 Buah
Gate Valve Stainless Steel, Ø 1 " merk O 10 K SCS 14, 1 Buah
Gate Valve Stainless Steel, Ø 1½ " merk O 10 K SCS 14, 1 Buah

GATE VALVE RESING STAINLESS STEEL
Merk “ SV” , Ø 1½ " , 5 K – 40 SCS14, 2 Buah
Merk “ SV” , Ø 2 " , 10 K – 50 SCS14, 1 Buah
Merk “ SV” , Ø 2½ " , SK – 65 SCS14, 2 Buah
Merk ALLOY, Ø 2½ " , Steel 3229, 1 Buah
Merk SNC, Ø 3 " , 10 K – 80, 1 Buah
Merk “ HK” , Ø 3” , 10 K – 80 SCS 13, 1 Buah
Merk WADA, Ø 5” , 10 K SCS 13, 2 Buah
Merk SVS, Ø 5” , 10 K SCS 13, 2 Buah

GLOBE VALVE STAINLESS STEEL
Merk “ S” , Ø 1” , 10 K 800, 1 Buah
Merk O , Ø 1” , 10 K, 1 Buah
Merk LOGIS, Ø 1½ ” , 1 Buah
Merk LEGRIS, Ø 1½ ” , 2 Buah
Merk JENKINS, Ø 1½ " 150, 1 Buah
Merk SNC, Ø 2” , 10 K SCS 13, 2 Buah
Merk WIN, Ø 3” , 2 Buah
Merk RIN, Ø 3” , 1 Buah
Merk “ LI” , Ø 3” , 150, 1 Buah
Merk KND, Ø 5” , 10 K– 125, 1 Buah

ND VALVE STAINLESS STEEL
Merk “ N” Ø ½ ” 10 K – 15 SCS 13 7 Buah
Merk “ N” Ø 1½ " 10 K – 25 SCS 13 1 Buah
Merk YONE Ø 2” 10 K SCS 131 Buah
Merk ARI Ø 2” PN 40 14408 1 Buah
Merk O Ø 2” 10 KSCS 13, 3 Buah
Merk - Ø 2” 10 KSCS 14, 1 Buah
Merk KITZ Ø 3” 10 KSCS 13, 2 Buah
Merk KINKA Ø 3” 150 CN 7 M, 1 Buah
Merk “ N” Ø 3” 10 KSCS 13, 1 Buah
Merk - Ø 3” PN 16, 1 Buah
Merk - Ø 3” S 183 N 8, 1 Buah
Merk KITZ Ø 4” 10 KSCS 13, 1 Buah

KNIE STAINLESS STEEL
Merk “ N” Ø ½ " 10 K SCS 13 2 Buah
Merk “ N” Ø 1” 10 K SCS 13 4 Buah
Merk - Ø 1” 150 TC
304 7 Buah

TEE STAINLESS STELL

Ø 1¼ " X ½ ” 6 Buah
Ø 1¼ " X 1¼ " 3 Buah
Ø 1½ " X 1 " 2 Buah
Ø 1½ " X 1½ ” 1 Buah
Ø 2½ " X 1½ " 1 Buah
Ø 2½ " X 2½ " 2 Buah
Ø 4” X 4” PICOR SGP 105 3 Buah

POMPA SREW STAINLESS STEEL

Merk SEIM ex Italy Code ED 554072000 K 15 Buah

MACAM MACAM ( STAINLESS STEEL)

Sock Draad Ø 1¼ " 6 Buah
Sock Draad Ø 3 " 1 Buah
Butterfly Ø 4 " 1 Buah
Forged Stell KARATU Ø 1” 600 316 L 2 Buah
Forged Stell Ø 1” 1500 1 Buah
Strinner ECON Ø 2” 4410 1 Buah
Strinner YONNE Ø 3” 10 K SCS 13 1 Buah
Elbow Ø 5” 1 Buah

Ball Valve Stainless Steel + Stang
Merk : RICHARD Ex Australia
Body/ Stem : S/ S 316
Max Temp : 200º
Seat : Kel. F

Ukuran Ø ¾ " 1 Buah
Ukuran Ø 1” 2 Buah

Forged Steel ( Stainless Steel) + Tongkat
Merk : SSS

Ukuran Ø ¼ " 1 Buah
Ukuran Ø 1½ " 3 Buah

LIQUID METER ( STAINLESS)
Merk : DRESSER Ø 2Ý
Model PL-28-2S – 1S
Kapasitas : 50 – 250 US.G Pm. 2 Buah

BARANG BARANG TEKNIK

BAHAN KUNINGAN

GATE VALVE KUNINGAN ( DRAAD)

Merk FUJI Ø 1” 1 Buah
Merk KITZ Ø 1” 3 Buah
Merk ONDA Ø 1½ ” 1 Buah
Merk TOYO Ø 2” 1 Buah
Merk KITZ Ø 2” 125 14 Buah

GLOBE VALVE KUNINGAN ( DRAAD)

Merk KITZ Ø ½ " 5 Buah
Merk KITZ Ø ¾ " 10 Buah
Merk ALINCO Ø ¾ ” 1 Buah
Merk KITZ Ø 1 " 14 Buah
Merk ECON Ø 1 " 1 Buah
Merk ECON Ø 1½ " 1 Buah
Merk KITZ Ø 1½ " 3 Buah
Merk ECON Ø 1¾ " 1 Buah
Merk KITZ Ø 2 " 1 Buah
Merk ONDA Ø 2 " 1 Buah
Merk KITZ Ø 2½ " 1 Buah
Merk ONDA Ø 2½ " 1 Buah

GLOBE VALVE KUNINGAN

Merk ECON Ø 1 " 1 Buah
Merk ECON Ø 1½ " 2 Buah
Merk TG Ø 2 " 7 Buah
Merk TOYO Ø 3 " 1 Buah
Merk KITZ Ø 3 " 1 Buah
Merk NH Ø 4 " 150 1 Buah

BALL VALVE KUNINGAN

Merk KITZ Ø 2 " 2 Buah
Merk KITZ Ø 2½ " 2 Buah
Merk KITZ Ø 3 " 3 Buah

PLUG KRAAN KUNINGAN

Merk SUEHRO Ø 3 " 1 Buah
Merk SUEHRO Ø 4 " 1 Buah

GLOBE VALVE BESI ( DRAAD)

Merk MALLABLE Ø 1½ " 10K 8 Buah
Merk MALLABLE Ø 2 " 10K 1 Buah

FORGED STEEL 800

FORGED STEEL TYPE GLOBE Ø ½ "

Merk ALCO Ex Italy body CR 13 5 Buah
Merk SAMSHIN Ex Korea body A 105 N 2 Buah
Merk SMITH Ex Singapore body A 105 1 Buah
Merk CHERO Ex Italy body A 105 2 Buah

FORGED STEEL TYPE GATE Ø ½ "

Merk SAMSHIN Ex Korea body A 105 3 Buah
Merk SMITH Ex Singapore body A 105 N 3 Buah
Merk HANCOCK Ex Japan 1 Buah
Merk SHORITZU Ex Japan 2 Buah
Merk SHKS body A 105 2 Buah

FORGED STEEL TYPE GLOBE Ø ¾ "

Merk SAMSHIN Ex Korea body A 105 3 Buah
Merk DON KANG Ex Korea body A 105 1 Buah

FORGED STEEL TYPE GATE Ø ¾ "

Merk SHKS body A 105 27 Buah
Merk CHERO Ex Italy body 304 4 Buah
Merk SAMSHIN Ex Korea body A 105 4 Buah
Merk ILSHIN Ex Korea body A 105 1 Buah
Merk SMITH Ex Korea body A 105 N 1 Buah
Merk CMB Ex Singapore body A 105 1 Buah
Merk SHORITZU Ex Japan 1 Buah
Merk FACIFIC Ex USA 1 Buah

FORGED STEEL TYPE GLOBE Ø 1 "

Merk ALSTHOMFLUIDES ex France 10 Buah
Merk SAM SHIN Ex Korea body A 105 4 Buah
Merk ALCO Ex Italy body A CR 13 1 Buah
Merk R-P & C 1 Buah
Merk SSS Ex Japan 1 Buah

FORGED STEEL TYPE GATE Ø 1 "

Merk SHKS body A 105 3 Buah
Merk CHERO Ex Italy body A 105 4 Buah
Merk SHORITZU Ex Japan body A 105 2 Buah
Merk OIC 1 Buah
Merk SMITH Ex Singapore body A 105 2 Buah
Merk NEWCO Ex China 1 Buah

FORGED STEEL TYPE GLOBE Ø 1½ "

Merk CHERO Ex Italy body 304 1 Buah

FORGED STEEL TYPE GATE Ø 1½ "

Merk CHERO Ex Italy body 304 2 Buah
Merk CORINTO Ex Spanyol body A 105 1 Buah

FORGED STEEL TYPE GLOBE Ø 2 "

Merk SAM SHIN Ex Korea body A 105 3 Buah
Merk NEW CO Ex China 1 Buah
Merk CHERO Ex Italy body A 105 1 Buah
Merk SH KS body A 105 1 Buah
Merk DINGOAOTIMO 1 Buah
Merk EXCO Class 600 2 Buah

FORGED STEEL TYPE GATE Ø 2 "

Merk CHERO Ex Italy body A 105 1 Buah
Merk TAKAMISAWA Ex Japan 1 Buah
Merk BONNEY Ex Korea 2 Buah
Merk LUNKENHEIMER 1 Buah

FORGED STEEL 800 TYPE CHEK VALVE

Merk BONNEY Ex Korea Ø ½ " 2 Buah
Merk TOYO Ex Japan Ø ¾ " 7 Buah
Merk ILSHIN Ex Korea Ø ¾ " 1 Buah
Merk BONNEY Ex Korea Ø 1” 3 Buah
Merk SAM SHIN Ex Korea Ø 1½ " 2 Buah
Merk EXCO F Ø 1½ " 1 Buah
Merk ALCO Ø 1½ " 1 Buah

FORGED STEEL 800 TYPE ND VALVE

Merk - Ø 2” 2 Buah

FORGED STEEL + FLENDES

Merk HATTERSLEY Ø ¾ " Type Globe 3 Buah
Merk HATTERSLEY Ø 1 " Type Globe 1 Buah
Merk CHERO Ø 1” Type Gate 1 Buah
Merk SAM SHIN Ø 1¼ " Type Globe 1 Buah
Merk SAM SHIN Ø 1½ " Type Globe 2 Buah
Merk HATTERSLEY Ø 1½ " Type Globe 1 Buah
Merk SSS Ø 1½ " Type Gate 2 Buah
Merk NEWMAN HEIDR Ø 1½ Ý Type Globe 2 Buah
Merk SSS Ø 2 " Type Globe 1 Buah
Merk - Ø 2” Type Gate 1 Buah
Merk KONAN Ø 2” Type Globe 1 Buah
Merk SMITH Ø 2” Type Gate 1 Buah
Merk Ø 2” Type Resing 1 Buah
Merk BONNEY Ø 1” Type Chek Valve 1 Buah
Merk SAM SHIN Ø 1½ " Type Chek Valve 2 Buah
Merk - Ø 1” Type ND Valve 1 Buah
Merk “ SV” Ø 4” 10 K – 100 SCS 14 2 Buah
Merk “ SV” Ø 5” 10 K – 125 SCS 14 1 Buah

MACAM MACAM
JENIS BARANG TEKNIK

MACAM MACAM BARANG TEKNIK.

01. ROOT BLOWER.

Merk : FGT Type FGL – 6
Revolotion : 2150
Delivery Dia : 125 mm ( Ø 5Ý )
Kapasitas : 13, 6 m³ / min.
Brake Power : 15 KW
Pressure : 2600 mm

Lengkap Motor

Merk : TOSHIBA 3 Phase Induction Motor
World Power
Power : 15 KW - 4 Pole
Speed : 1450 Rpm
Voltage : 380 Volt 50 Hz 30, 3 Amp. 1 Unit

02. ROOT BLOWER.

Merk : AERZEN Type GLA – 15
1G62 – 2
In/ Outlet : Ø 8Ý × Ø 8Ý
Keterangan : Tanpa Motor 1 Unit

03. CONTROL VALVE.

Merk : ITT HAMWELL FOROED
Diameter : Ø ¾ Ý 87868 AM
Jumlah : 1 Buah

04. CONTROL VALVE.

Merk : FISHER Type 510 CR
Travel : 5/ 8
Rating : BSPT
Jumlah : 3 Buah

05. CONTROL VALVE

Merk : -
Type : 5432
Diameter : Ø 2Ý
Jumlah : 1 Buah

06. CONTROL VALVE

Merk : ITT Type V – 5120
Diameter : Ø 2½ Ý ( 65)
Suply Air : 0, 2 - 1 BAR
TRIM : 316 SS
Body : SC 49
Temp : 540º C
Working Press : 20 BAR
Action : RA
Serial : 300940
Jumlah : 1 Buah

07. KNIFE GATE VALVE.

Merk GG ND.16 ( Abu-abu) Ø 2Ý 1 Buah
Merk RE 080 ( Coklat) Ø 3Ý 1 Buah
Merk STAF JO 800 Ø 8Ý 1 Buah

Air Vent. Valve SB.25 Ø ¾ Ý 2 Buah
Air Vent. Valve AF – 4 Ø 1Ý 1 Buah
Air Vent. Valve Val Matic Val. Matic
Model : No.102. DWS 300 PSI WP Ø 2Ý 2 Buah

Pneumatic Positioner 1 Buah
Merk : FOXBORO Type C
Serial : 71.J.187
Suply : 2 KG/ Cm²
Input : 0 – 15 Psi
Output : 0 – 15 Psi

Pneumatic D/ P Cell Transmiter 1 Buah
Merk : FOXBORO
Type : Capsul SUS 316 L
Working Pressure : 100 Kg / Cm²
Range : 0 – 900 mm H² O
Serial : 503 FA 043

NAPCO AP. VALVE FCD/ 5A 3F
Ex. Japan Ø ½ Ý 1 Buah

FLOW METER
Merek/ type : SPIRAX SARCO/ VFM 5700 K 1 Buah
Diameter : Ø 2”
Serie Number : I 081102
Pressure Nom : 150 Lbs
Temp. Range : 20 - 240º C
Range : 0 – 445 m3/ H
Power Suply : 12 – 36 Vdc
Output Signal : 4 – 20 mA
Pulse Output : Pasive 0 – 24 Vdc
100 mA max.
Meter body : SS 316 L
Bluff Body : TITANIUM
Seal : INCONEL

Harga VALVE READYFOR USE IN ( IN STOCK)

: CALL
We as the main distributor of the J-FLEX RUBBER PRODUCTS, England, by selling speed rubber sheet rubber products & component engineering,

with the profile into its component parts: Seal for hydraulic-Pneumatic cylinder, flexibles consists of: Rubber Connections, Discharge socks, Gaiters, Bellows, cones , tubes, Flange sleeve, Covers, ballast bags, Vulcanised joint rings, Expansion joints, Sleeves Rubbers, gaskets, Diaphragms, washers,

His material consists of:
Red, White, translucent, Blue, black silicone rubber 60 ' shore, sheeting
Blue FDA, FDA translucent Slicone, Milky White Fda silicone, Red Silicone Fda, Yellow Silicone Fda Rubber 60 " shore, sheeting
Food Quality Translucent Silicone Rubber Sheeting 40' Shore A
Silicone Rubber 10' Shore A
" HTM " Light Green Thermally Conductive Silicone Sponge
Closed Cell Silicone White sponge sheeting, Closed Cell Silicone white Sponge Fda.
Red Iron Oxide Silicone Reinforced With 1 Ply Glass Cloth Insertion Sheet Fda.
Blue ( Nearest Pantone - 2955U) Metal Detectable Silicone Sheet Fda Compliant
Black gunuine DuPont Viton sheet 75 ' shore.
White FDA viton sheet 65 ' Shore
Nitriles / Nylon Sheet diaphragm
Neoprene / Nylon diaphragm sheet
Nitriles PVC / Nylon Floating Roof Tank Seals
Seat Valve Blue silicone Fda, Seat Valve Red Silicone Fda, Seat Valve Milky White Silicone Fda
EPDM 65 ' Shore
Viton Sheet
Viton sponge sheet

Market Sectors including:
Materials handing, Parmaceutical, Dry & Wet cement manufacturers, vibratory Motors, Offshore Oil, Food Processing, Dairy Industry, Animal feed stuffs, Agro-Chemical fertilizer, Pottery & ceramic, beverage production, Woodworking / Dust extraction, power plants, Test fasilities, marine engineering, Transportation, Environmetal Control, water engineering, textile machinery, paper machinery, Hydraulic engineering

Other products that we marketed:
One part caulk sealant Fluorodyn
Fluorolast solvent based coating ( Self-curing type)
Flurolast water borne coating ( head curable)
viton rubber coated product

We Al Nazeer Nippon Chemicals are the manufacturers and exporters of Elfy brand adhesives and sealants, our product range includes :
1.Super Glue

2.Silicone Sealants

3.RTV. Gasketmakers

4.Epoxy steel / clear Adhesives

Pump Sealing Technology Product by Slade USA:
Why Traditional Packings Fail

How a Stuffing Box Should Look When Completely Packed Using Traditional Packings
How a Stuffing Box Looks After Several Gland Adjustments Using Traditional Packings
Traditional packings are mostly fiber with added lubricants that can be squeezed, cooked or washed out, resulting in out-of position lantern rings, over-compressed packing and sleeve wear.

Slade Packed Centrifugal Pumps: Typical Stuffing Box VERSES Slade Packed Stuffing Box
Typical Stuffing Box: A typical stuffing box requires leakage and/ or flush-water to dissipate heat, creating costly housekeeping problems, loss of product and/ or loss of flush-water. Additional rings cannot be added without affecting position of lantern ring.

Slade Packed Stuffing Box: In most applications, a Slade packed stuffing box can be run without flush-water and/ or with virtually no leakage. In many applications, both No-Flush & No-Leak are possible! Additional rings can be added as needed.
Flush-Free & Virtual Leak-Free Service
slade packed stuffing boxDepending on design of equipment and speed of shaft, a permanent split bushing may be installed last ( after 3300G Rings) . Please contact us for a recommendation.

Seals Rotating Equipment:

Whereas most pump packings are largely abrasive fibers with added lubricants that can be squeezed, washed or cooked out, Slade 3300G utilizes the self-lubricating qualities of the very best natural, exfoliated graphite.

Incorporating just enough temperature and chemical resistant  carbon fiber to make very high tensile strength yarns, Slade s patented technology allows the braided packing rings to transfer frictional heat away from high speed shaft sleeves, eliminating the need, in most cases, for cooling water.

Since cooling or flushing is not typically required, there is no need for lantern rings. This eliminates the concern of the lantern rings being adjusted out of position, flush water ports becoming plugged, or sleeve wear caused by the corrosive nature of highly oxygenated water on hardened sleeves.

Pump Applications
For Steam, Nuclear and Hydro-Electric Plants

Boiler Feed Water
Boiler Recirculation
Condensate Pumps
Service Water Pumps
River Water Intake
Heater Drain Pumps
Vacuum Pumps
Clinker Grinders
Fly-Ash Pumps
Lime Slurry pumps
Auxiliary Feed-Water
Fire Pumps

For Pulp and Paper Mills

Refiners
Pulpers
Separators
Deflakers
Stock Pumps
Coating Pumps
Vacuum Pumps
Agitators
Condensate Pumps
Boiler Feed Pumps
Boiler Recirculation Pumps
Stock Chests
Mixers
Steam Vessels
Liquor Pumps
Outlet Devices

Product Information :

3300C Type:
Slade s Cost Effective Pump and Valve Packing
Reinforcement: Each yarn of graphite foil is reinforced with high strength structural carbon fiber
Temp:
Mild Oxidizers to 1800° F/ 1000° C ( for temperatures over 1000° F/ 540° C, consult the factory)
Pressures:
Valves to 1000 PSI/ 70 BAR ( for higher pressures, consult factory)
pH Range: 1-14
3300W Type:
Inconel wire reinforced for higher pressures: 5000 PSI/ 350 BAR
3300LC Type: Low chloride, high purity for nuclear service
3300LS Type: Low sulfur, high purity for nuclear service

3300G Type:
Slade s Best All Purpose Pump and Valve Packing
Reinforcement: Corners and yarns of graphite foil reinforced with high strength structural carbon fiber
Temp: Mild Oxidizers to 1800° F/ 1000° C ( for temperatures over 1000° F/ 540° C, consult the factory)
Pressures: Valves to 5000 PSI/ 350 BAR without end-rings
Pumps: Flush-free in many services to 4800 FPM ( 1400 m/ min)
pH Range: 1-14
Applications: Chemicals, steam, hydrocarbons, etc.
Advantages:

One packing inventory for all pumps and valves
Works well on worn sleeves
Difficult to overtighten
No added lubricants to squeeze out or burn off
Eliminates flush-water in most applications
Not necessary to replace entire set, just add ring
Won t glaze or harden
Eliminates most leaks
Amperage reduction of 15% is typical
No special end-rings required
Outlasts typical packings by factor of 6
4800 fpm/ 24 ms ( without flush water)
pH 1-14
Operates virtually leak-free in most applications
Low chloride/ sulfur available for nuclear service

Installation:

Check clearances and dimensions
Best to use no more than 5 rings in stuffing box ( use Slade spacer bushings to reduce rings)
Cut rings on the bias ( 45° angle) , stagger joints
Compress each sealing ring at least 25% ( especially the first ring) . Do not compress spacer bushings.
Loosen gland to allow it to relax
Snug the gland bolts and start the pump

3300GLC Type: Low chloride for nuclear service
3300GLS Type: Low sulfur for nuclear service

3300K Type:
Slades Best Triplex Pump, Reciprocating Packing
Reinforcement: Same as 3300C, but with added Kevlar fiber corners
Temp: Maximum temperature of 500° F/ 260° C
Applications: Reciprocating/ plunger, wastewater, steam and ammonia pumps
Pressures: 5000 PSI/ 350 BAR
pH Range 2-12
3300CJ Type:
Slade s Anti-Extrusion Carbon Fiber Packing
Description: Carbon jacketed 3300C
Pressures: Valves to 1000 PSI/ 70 BAR ( for higher pressures, consult factory)
Application: Used as anti-extrusion end-ring
3300CJK Type:
Slade s Anti-Extrusion Carbon Fiber Packing
Description: 3300C with Kevlar corners
Temp: 500° F/ 260° C
Application: Used as end-ring to provide anti-extrusion ( especially with large throat clearances) and to provide barrier to particulate contamination

Advantages:
Minimizes or Virtually Eliminates Leakage!
Due to its patented construction of natural, expanded graphite yarns, Slade 3300G turns the stuffing box into a heat sink, conducting heat away from shaft, in many applications, eliminating expensive leakage previously needed to cool the stuffing box.

Can Be Operated Flush-Free in Most Applications
Slade 3300G conducts heat away from the shaft/ sleeve, in most cases making flush unnecessary. If media has particulate contamination, a very mild flush should be all that is required.

No flush-water translates into:
Exceptional savings, typically 1/ 2 cent per gallon, or $ 13, 000 annually ( U.S.) ( based on 5 GPM flush system)
No fear of flush-water system becoming plugged or experiencing loss of pressure

Reduces Inventory and Cost
By eliminating die-formed rings ( cut-rings work fine)
Handles most medias, 1-14 pH, eliminating many styles of packing
In many applications, no need to remove old packing, just add a ring
Lasts 4 to 6 times longer than traditional pump packings
Worn Shafts and Sleeves Easily Sealed
Conforms to the geometry of the stuffing box and shaft. Seals most worn sleeves.

Valve Sealing Technology
Applications:
Gate Valves
Globe Valves
Pinch Valves
Diaphram Valves
Needle Valves
Plug Valves
Butterfly Valves
Ball Valves
Check Valves
Relief Valves
Control Valves
Knife Valves

Product Selection:
3300C
3300G
3300W
3300CJ
Enviro-Foil Valve Spacer Bushing
Vapor Depositioned 3300G Valve Spacer Bushing

Product Information
3300C Type:
Slade s Cost Effective Pump and Valve Packing
Reinforcement: Each yarn of graphite foil is reinforced with high strength structural carbon fiber
Temp:
Mild Oxidizers to 1800° F/ 1000° C
( for temperatures over 1000° F/ 540° C, consult the factory)
Pressures: Valves to 1000 PSI/ 70 BAR ( for higher pressures, consult factory)
pH Range: 1-14
3300W: Inconel wire reinforced for higher pressures: 5000 PSI/ 350 BAR
3300LC: Low chloride, high purity for nuclear service
3300LS: Low sulfur, high purity for nuclear service

3300G Type:
Slade s Best All Purpose Pump and Valve Packing
Reinforcement: Corners and yarns of graphite foil reinforced with high strength structural carbon fiber
Temp:
Mild Oxidizers to 1800° F/ 1000° C ( for temperatures over 1000° F/ 540° C, consult the factory)
Pressures: Valves to 5000 PSI/ 350 BAR without end-rings
Pumps: Flush-free in many services to 4800 FPM ( 1400 m/ min)
pH Range: 1-14
Applications: Chemicals, steam, hydrocarbons, etc.
Advantages

Please click here to see the comprehensive list of advantages that 3300G has to offer.

Installation:
Check clearances and dimensions
Best to use no more than 5 rings in stuffing box ( use Slade spacer bushings to reduce rings)
Cut rings on the bias ( 45° angle) , stagger joints
Compress each sealing ring at least 25% ( especially the first ring) . Do not compress spacer bushings.
Loosen gland to allow it to relax
Snug the gland bolts and start the pump

3300GLC: Low chloride for nuclear service
3300GLS: Low sulfur for nuclear service

3300W Type:
Slade' s Best Valve Packing
Reinforcement: Each yarn of graphite foil is reinforced with Inconel " Foil shrouded in high strength carbon fiber
Temp:
Mild oxidizers to 1800° F/ 1000° C ( for temperatures over 1000° F/ 540° C, consult the factory)
Pressures: Up to 5, 000 psi/ 345 psi

3300CJ Type:
Slade' s Anti-Extrusion Carbon Fiber Packing
Description: Carbon jacketed 3300C
Pressures: Valves to 1000 psi/ 70 bar ( for higher pressures, consult factory)
Application: Used as anti-extrusion end ring

Advantages:
Fire Safe
Slade braided graphite foil is API Fire Test Certified
API 589 First Edition
API 607 Fourth Edition ( modified by EXXON Specs)
Tested by Southwest Research Institute
Witnessed by 3 EXXON Engineers
Temperatures to 1800° F/ 1000° C
Tested at 5% of allowable standard
Performed under a grant from the American Petroleum Institute
Warning: Valves sealed with packings containing lubricants or blocking agents ( PTFE) may cause secondary fires when exposed to the intense heat of a fire in another unit, which would cause packing shrinkage and leakage of flammable fluids causing a secondary fire.
SLADE Patented Packings: rated FIRE SAFE

Emission Safe
PERF Emission Standards
Contact Slade for documentation
EXXON-Emission Report:
Emission tests, performed at a leading petroleum company' s test facility in Florham Park, NJ ( using PERF procedures and standards) , show that Slade patented, reinforced braided graphite foil outperformed standard die-formed graphite sealing rings.
Slade reduced emissions by 74% .
Corpus Report:
A major Gulf Coast, USA refinery reports that 96% of the 325 valves packed with slade reported zero ppm emissions. Most of these valves were packed in the field by inexperienced installers.
Cambridge Report:
A major USA West Coast refinery reports that after 5 years, 96% of the 282 field installed valves were at zero emissions and that the 3, 000 psi hydrogen control valves never went over 9 ppm during the 5 year test. Most of these valves were packed in the field.
All claims made herein are documented.

GASKET:

Pyro-Tex Woven Gasket Sheet Type:
A resilient, compressed sheet& that works!

Ready to be cut for use in severe conditions.

Services:
High temperatures ( for temperatures over 1000° F/ 540° C, consult the factory)
High pressures ( up to 4500 psi/ 310 bar)
High equipment wear ( scratches/ pores)

Reinforced with Flat Metal Leaf Springs( a) of stainless steel, encapsulated in a thick vermiculated graphite foil jacket ( b) . These metal reinforced graphite strands, Slade s weaving yarns, are woven into a tough, resilient cloth-like sheet ( c) .

The flat metal leaf springs at the core of each strand crisscross each other throughout the cloth to impart an enduring resiliency.

The woven sheets are compressed to increase density to form a leak tight gasket sheet.

Advantages
Flat metallic leaf springs, jacketed with graphite foil, make this 80 x 80 sheet the most resilient gasket you will need.
It takes physical abuse like no other graphite foil, handling and feeling like tough leather.
The metallic spring strands are woven across one another to actuate the gasket through each thermal cycle continually adjusting to expansion and contraction that leaves other compressed gasketing lifeless ( d) .
Pyro-Tex gasket sheet replaces spiral wound gaskets, removing the spiral leak path and eliminating the need for a compressing ring to prevent crushing.
Pyro-Tex gasket sheet puts flanges back in compliance by filling scratches, pores, and steam cuts with flexible graphite.
Each sheet is packed in heavy-duty tubes to eliminate shipping palettes and enable easy storage and handling.

Gasket Types:
Ring and Full Face
Manhole and Handhole
Diesel Exhaust Flange
Manifold
Combustion Engine Head
Turbine Crossover
Pressure Vessel
Heat Exchanger
Nuclear Service

Gasket Standard Sizes: Gasket Special Sizes:
80 x 80 60 x 60
3/ 32 ( nominal) 80 x any length

Pyro-Tex Joint Sealant Type:

Slade s self-forming gasket, the Pyro-Tex Joint Sealant, is made from patented graphite-foil encapsulated carbon-fiber reinforced yarns ( also available with stainless-steel foil yarns) . This self-forming gasket when in place is compressed to fit snugly. Available in 25 and 50 foot spools in various configurations, shapes, and thicknesses.

Change gasket without pulling tube bundles
Adhesive bonds in place during installation
Self forms into endless gasket
Made to virtually any thickness or width
Never hardens or dries out
Metallic reinforcement impedes extrusion
Readjustable, often re-usable
Individual strands reinforced with:
carbon fiber, 304 SS, or Inconel foil
Packaged on plastic spools
Inventory just one or two sizes
Eliminates the need to remove heat exchanger tubes from the shell

Performs better than:
Double jacketed metal gaskets
Spiral wound gaskets
Corrugated metal gaskets
More reliable than PTFE joint sealants
Eliminates large inventories
Easier to Handle
Stops damage from rough handling
Doesn' t kink out of shape
Adjusts to warped flanges
Fills pits and scratches up to 1/ 8 " deep

Pressures
Stainless & Inconel versions, 4500psi
Carbon fiber version, low pressure services only

Temperatures
for temperatures over 1000° F/ 540° C, consult the factory

Chemical compatibility:
Consult Factory

Pyro-Tex Joint Sealant HP Type:

Pyro-Tex HP ( high-pressure) Joint Sealant is made from the same patented stainless-steel foil yarns as our sheet ( also available with carbon fiber reinforcement) . Available in 25 and 50 foot spools in various configurations, shapes, and thicknesses.

Change gasket without pulling tube bundles
Adhesive bonds in place during installation
Self forms into endless gasket
Made to virtually any thickness or width
Never hardens or dries out
Metallic reinforcement impedes extrusion
Readjustable, often re-usable
Individual strands reinforced with:
304 SS or Inconel foil
Packaged on plastic spools
Inventory just one or two sizes
Eliminates the need to remove heat exchanger tubes from the shell

Performs better than:
Double jacketed metal gaskets
Spiral wound gaskets
Corrugated metal gaskets
More reliable than TFE joint sealants
Eliminates large inventories
Easier to Handle
Stops damage from rough handling
Doesn' t kink out of shape
Adjusts to warped flanges
Fills pits and scratches up to 1/ 8 " deep
Pressures
Stainless & Inconel versions 4500psi
Temperatures
( for temperatures over 1000° F/ 540° C, consult the factory)

Chemical compatibility:
Consult Factory

Industries Served:

Steam, Nuclear, and Hydro-Electric Plants :
Boiler Feed Water
Boiler Recirculation
Condensate Pumps
Service Water Pumps
River Water Intake
Heater Drain Pumps
Vacuum Pumps
Clinker Grinders
Fly-Ash Pumps
Lime Slurry pumps
Auxiliary Feed-Water
Fire Pumps

Pulp and Paper Mills:
Refiners
Pulpers
Separators
Deflakers
Stock Pumps
Coating Pumps
Vacuum Pumps
Agitators
Condensate
Boiler Feed Water
Boiler Recirculation
Liquor Pumps
Continuous Digester
Outlet Devices
High Pressure Feeder
Stock Chests

PetroChemical and Oil & Gas Refineries:
Hydrocarbon Pumps
Residual Pumps
Heat-Transfer Fluid Pumps ( Hot Oil)
Bottoms Pumps
Cooling Tower Pumps
Steam Turbines
Compressors
Molten Sulphur Pumps
Ammonia Pumps
Paraffin Extraction Pumps
Boiler Feed Pumps
Condensate Pumps
( many others)

Mining:
Water and Slurry Pumps

Boats/ Shipping:
Stern Tubes ( Tail Shafts)
Washdown Pumps
Fire Pumps
Saltwater Pumps
Bilge Water Pumps

Steel Manufacturing:
Water and Slurry Pumps

Sugar Refineries:
Raw Sugar Pumps
Juice Pumps
Syrup Pumps
Molasses Pumps
Vacuum Pumps

Distribution of product marketing area consists of:

CV.JAVATECH-SEAL Region City of Jakarta, Bogor, Depok, Tangerang, Bekasi( JABODETABEK) and surrounding areas, Indonesia

Address: Jl. Majapahit No.283, Depok II , Kota Depok, East Java
Telp : 021 7710074
Fax : 021 7710074
Contac person: Mrs. Cony Esther
Mobile: 081216641164
Email: techseals@ ymail.com
http: / / javatechseals.indonetwork.co.id

CV.Java Tech-Seal, Bandung Branch for Region Bandung City and surrounding areas, West Java, Indonesia

Address : Leuwigoong 104, Kota Cimahi - Jawa Barat ( Workshop )
Contac person: Mr. Rahadian Norowiyoso S.Si
Telp : 022 91791705
Mobile: 082347744243
Email: techseals@ ymail.com
http: / / javatechseals.indonetwork.co.id

Piramida Sakti Teknik, CV Region Yogyakarta, Solo, Semarang City and Surrounding Areas, Central Java, Indonesia
Address : Perum Puri Permata no.1A, Gunung Kunci, Kartasura-Solo, Central Java
Contac person: Mr.Deni Firmansyah SE.MM
Phone: 0271 784350
Fax : 0271 780059
Mobile: 081808092128; 085292647770
Email : techseals@ ymail.com

CV.Cahaya Seals and Gasket Region Malang City and Surrounding Areas, East Java, Indonesia

Address : Sulfat Garden D10, Jl. Simp Adi Sucipto Malang 65123
Contac person: Mr.Johan Dwi Wisnu, ST
Mobile: 08155522115

PT.Centra Indo Artha Region Kalimantan, Maluku, papua, and Surrounding Areas, Indonesia
Address : Kompleks Ruko Mega Grosir Cempaka Mas Blok D1-30
Jl. Let Jend Suprapto, Jakarta Pusat 10640
Telp 021 42888089
Fax: 021 33342111

Contac person: Mr.Johni Mende,
Mobile: 081311077763

CV.Java Tech-Seal, Luwuk Branch for Region Banggai and surrounding areas, Central Sulawesi , Indonesia

Address : BTN Pepabri Luwuk Banggai- Sulawesi Tengah
Contac person: Mr. Tony Samuel
Mobile: 0812 1664 1164
Email: techseals@ ymail.com
http: / / javatechseals.indonetwork.co.id

Produk / Jasa Utama
Menjual:
SEAL HYDRAULIC-PNEUMATIC DMH
Seal DMH, a CNC based lathe system, which we have avaible and allows us to produce:
DMH=Any Seal Profile
DMH= Any Material: H-PU, C-HPU, C-HPU 55D, NBR, H-NBR, FPM, EPDM, MVQ, PTFE VIRGIN, PTFEDO5, PTFEDO8, PTFE GM, PTFED46, PTFE CARBON, POM, PA, PE
DMH = CNC SEALMASTER turning lathes for plastic and metallproduction.
DMH = Plastic and Elastomer semi finish products, over 25 different materials for seal production.
DMH = Seals for hydraulic, pneumatic and general applications.
DMH = Rubber and Plastic parts.
DMH = Competent and excellent service.
DMH = Short delivery times.
RUBBER SHEETING
Silicone Rubber sheeting-red, white, translucent, blue & Black.
Silicone / fabric Reinforced composites.
Flurosilicone ( sheet or Strip )
Silicone Sponge Sheeting
Genuine Dupont Viton ' A' & ' B' sheet.
White Fda Viton ' A' Sheet
Viton / Fabric Reinforced sheet
Viton Sponge sheet
Reinforced Diaphragm sheeting Nitrile / Neoprene / EPDM.
CUSTOM MADE COMPONENS:
Moulded rubber products including Diaphragm & Bellows
Rubber to Metal bondings
Extruded section ( solid and sponge )
Jointed cord and profile rings
Gaskets, Seals, and joints
Flexible Connetions and fabrications.
Inflatable seals
Viton sealant and adhesive
PUMP PACKINGS
Pump Sealing Technology

Why Traditional Packings Fail

How a Stuffing Box Should Look When Completely Packed Using Traditional Packings
How a Stuffing Box Looks After Several Gland Adjustments Using Traditional Packings
Traditional packings are mostly fiber with added lubricants that can be squeezed, cooked or washed out, resulting in out-of position lantern rings, over-compressed packing and sleeve wear.

Slade Packed Centrifugal Pumps: Typical Stuffing Box VERSES Slade Packed Stuffing Box
Typical Stuffing Box: A typical stuffing box requires leakage and/ or flush-water to dissipate heat, creating costly housekeeping problems, loss of product and/ or loss of flush-water. Additional rings cannot be added without affecting position of lantern ring.

Slade Packed Stuffing Box: In most applications, a Slade packed stuffing box can be run without flush-water and/ or with virtually no leakage. In many applications, both No-Flush & No-Leak are possible! Additional rings can be added as needed.
Flush-Free & Virtual Leak-Free Service
slade packed stuffing boxDepending on design of equipment and speed of shaft, a permanent split bushing may be installed last (after 3300G Rings). Please contact us for a recommendation.
Seals Rotating Equipment

Whereas most pump packings are largely abrasive fibers with added lubricants that can be squeezed, washed or cooked out, Slade 3300G utilizes the self-lubricating qualities of the very best natural, exfoliated graphite.

Incorporating just enough temperature and chemical resistant ‘carbon fiber’ to make very high tensile strength yarns, Slade’s patented technology allows the braided packing rings to transfer frictional heat away from high speed shaft sleeves, eliminating the need, in most cases, for cooling water.

Since cooling or flushing is not typically required, there is no need for lantern rings. This eliminates the concern of the lantern rings being adjusted out of position, flush water ports becoming plugged, or sleeve wear caused by the corrosive nature of highly oxygenated water on hardened sleeves.
Pump Applications
For Steam, Nuclear and Hydro-Electric Plants

Boiler Feed Water
Boiler Recirculation
Condensate Pumps
Service Water Pumps
River Water Intake
Heater Drain Pumps
Vacuum Pumps
Clinker Grinders
Fly-Ash Pumps
Lime Slurry pumps
Auxiliary Feed-Water
Fire Pumps

For Pulp and Paper Mills

Refiners
Pulpers
Separators
Deflakers
Stock Pumps
Coating Pumps
Vacuum Pumps
Agitators
Condensate Pumps
Boiler Feed Pumps
Boiler Recirculation Pumps
Stock Chests
Mixers
Steam Vessels
Liquor Pumps
Outlet Devices
3300G – Slade’s Best All Purpose Pump and Valve Packing
Reinforcement: Corners and yarns of graphite foil reinforced with high strength structural carbon fiber
Temp: Mild Oxidizers to 1800°F/ 1000°C (for temperatures over 1000°F/ 540°C, consult the factory)
Pressures: Valves to 5000 PSI/ 350 BAR without end-rings
Pumps: Flush-free in many services to 4800 FPM (1400 m/ min)
pH Range:
1-14
Applications: Chemicals, steam, hydrocarbons, etc.
Advantages:

One packing inventory for all pumps and valves
Works well on worn sleeves
Difficult to overtighten
No added lubricants to squeeze out or burn off
Eliminates flush-water in most applications
Not necessary to replace entire set, just add ring
Won’t glaze or harden
Eliminates most leaks
Amperage reduction of 15% is typical
No special end-rings required
Outlasts typical packings by factor of 6
4800 fpm/ 24 ms (without flush water)
pH 1-14
Operates virtually leak-free in most applications
Low chloride/ sulfur available for nuclear service

Installation:

Check clearances and dimensions
Best to use no more than 5 rings in stuffing box (use Slade spacer bushings to reduce rings)
Cut rings on the bias (45° angle), stagger joints
Compress each sealing ring at least 25% (especially the first ring). Do not compress spacer bushings.
Loosen gland to allow it to relax
Snug the gland bolts and start the pump

3300GLC: Low chloride for nuclear service
3300GLS: Low sulfur for nuclear service

Advantages

Minimizes or Virtually Eliminates Leakage!
Due to its patented construction of natural, expanded graphite yarns, Slade 3300G turns the stuffing box into a heat sink, conducting heat away from shaft, in many applications, eliminating expensive leakage previously needed to cool the stuffing box.

Can Be Operated Flush-Free in Most Applications
Slade 3300G conducts heat away from the shaft/ sleeve, in most cases making flush unnecessary. If media has particulate contamination, a very mild flush should be all that is required.

No flush-water translates into:

Exceptional savings, typically 1/ 2 cent per gallon, or $13, 000 annually (U.S.) (based on 5 GPM flush system)
No fear of flush-water system becoming plugged or experiencing loss of pressure

Reduces Inventory and Cost

By eliminating die-formed rings (cut-rings work fine)
Handles most medias, 1-14 pH, eliminating many styles of packing
In many applications, no need to remove old packing, just add a ring
Lasts 4 to 6 times longer than traditional pump packings

Worn Shafts and Sleeves Easily Sealed
Conforms to the geometry of the stuffing box and shaft. Seals most worn sleeves.
EXTRUSIONS RUBBER
CUSTOM MADE EXTRUSIONS
Whether you are looking for tubing, sleeving, strips, cord or complex profiles, we can supply the extrusion you need, whatever the specification. We can also put high temperature adhesive backing onto many of our extruded products.
Produced solid and sponge grades of silicone+EPDM, Neoprene, PVC Nitrile, Natural rubber, Polyurethane and TPE.
Viton sponge profiles; strips and cords are a speciality.
We have a choice of over 2.000 existing sections to use- so our experience is good with a wide range of profile geometry. Fromtiny micro sections to huge profiles, its all the same to we.
Rubber Mouldings
Mouldings tailor made to your requirements
include: bellows, suckers, discs, rubber to
metal bondings, pads, boots, valve seals,
diaghrams and sheets etc.
We mould by compression, transfer and
injection moulding techniques - ask for further
information about these techniques.
J-Flex is the comprehensive source for all of
your moulding requirements, be it small,
medium or large volume.
Our polymer range is vast - if the compound is
available, we can mould it. Suffice to say we
use all current natural and synthetic polymers,
including EPDM, Viton® Silicone, Nitrile,
HNBR, Aflas® and Perfluoroelastomer.
We sample new moulds to complete your
satisfaction and approval before we
commence bulk supply. Deliveries by
agreement - but never late!
Consider the options, then let J-Flex mould
your requirements into shape.
RUBBER FABRICATIONS
J-Flex supply all different types of custom fabricated
rubber components. From small lathe cut rings, right up
to huge corrosion protection wraps.
Massive tapered cones+bushes, bellows, flanged
connectors, valve covers, discharge sleeves, expansion
joints and compensators galore - all made from
high quality polymers and reinforcing fabrics.
Inflatable seals, vulcanised joined rings
and die-cut gaskets complete the
range of J-Flex fabrications.
Products can be bonded
with adhesive, stitched/ sewn
or hot vulcanised, dependent
upon the application.
RUBBER FABRICATIONS FOR OIL AND GAS
Extruded Viton® & PVC Nitrile vapour
seal sections
Hand fabricated expansion joints to
contain flue gas emissions
Fire resistant / low smoke low toxic
silicone extruded door & hatchway seals
Injection moulded mud/ slush pump seals
Moulded slurry pump diaphragms
Fabricated vapour barrier tube seals
Strips; joints & gaskets for sealing
accomodation modules & containers
Massive hot vulcanised cord or section
rings - no upper diameter limits!
Fabricated rubber & sponge specials
Inflatable seals – custom made
Moulded fabric reinforced diaphragms
Bop sealing elements
RUBBER INSULATE
Stitched rubberised fabric compensators
to silence pipework systems
Sponge tubings
Strips, joints & gaskets for insulating pipes
HVAC expansion joints
Insulation jackets - sewn fabric/ sponge
composites
RUBBER FOR PROTECT
Anti-fouling markers & protection materials
Fully bonded rubber/ metal track pads on
pipe laying equipment
Pipe systems piggy-back mouldings
Hand fabricated expansion joints to contain
flue gas emissions
Part moulded/ part hand formed diaphragm
bellows
Fabricated corrosion protection wraps
Waterjet cut rubber; plastics & metal parts
Machined metal parts
MicraSil® anti-microbial hand gel (lasts 8 hrs)
Sheets, gaskets & seals made from low
smoke, low toxic (f.r.) materials
Metal detectable elastomeric materials
MicraSil® anti-microbial material products
BELLOWS AND COVERS
Mouldings tailor made to your requirements
include: bellows, suckers, discs, rubber to
metal bondings, pads, boots, valve seals,
diaghrams and sheets etc.
We mould by compression, transfer and
injection moulding techniques - ask for further
information about these techniques.
J-Flex is the comprehensive source for all of
your moulding requirements, be it small,
medium or large volume.
Our polymer range is vast - if the compound is
available, we can mould it. Suffice to say we
use all current natural and synthetic polymers,
including EPDM, Viton® Silicone, Nitrile,
HNBR, Aflas® and Perfluoroelastomer.
We sample new moulds to complete your
satisfaction and approval before we
commence bulk supply. Deliveries by
agreement - but never late!
Consider the options, then let J-Flex mould
your requirements into shape.

Kami Menjual
  • Gasket

Dapatkan penawaran terbaik untuk
VALVE READYFOR USE IN ( IN STOCK) !

Nama
Quantity
Unit
Minta Penawaran
IndoTrading.com adalah media iklan khusus Perusahaan, Toko, Distributor, Grosir, Agen, Supplier, Importir, Exportir, Trading dan Pabrik. Jika Anda tertarik untuk membeli VALVE READYFOR USE IN ( IN STOCK) ini dengan harga murah, Mohon hubungi Kontak Perusahaan ini diatas.

Jika Anda adalah perusahaan yang ingin menjual di IndoTrading.com , Anda bisa mendaftarkan perusahan Anda disini
Kontak Supplier
Java Tech-Seal

Response Rate :
100%
Brigjend Katamso 165, Waru Sidoarjo 16256, Jawa Timur Sidoarjo, Jawa Timur - Indonesia

Perusahaan Lainnya yang berkaitan dengan

PT. Buana Makmur Mandiri

Verified Supplier
Indotrading gold member
5 Tahun
Response Rate 100%

Mitra Glodok

Verified Supplier
Indotrading gold member
1 Tahun
Response Rate 100%

Indo Rolica Teknik

Verified Supplier
Indotrading gold member
1 Tahun
Response Rate 100%
Arrow