FRITSCH Disk Mill PULVERISETTE 13 classic line

Order No. 13.1030.00

FRITSCH Disk Mill  PULVERISETTE 13  classic line

OVERVIEW

High final fineness for large quantities

The especially heavy and solid FRITSCH Disk Mill PULVERISETTE 13 classic line is the ideal instrument for fine grinding of up to 150 kg per hour of hard-brittle and medium-hard solids – even in continuous operation. The maximum feed size per piece is approximately 20 mm edge length, the final fineness is freely adjustable between 12 mm and 0.1 mm.

WORKING PRINCIPLE

Pressure and shearing action

The material to be ground is comminuted by pressure and shearing action between two counteracting grinding disks with coarse interlocking teeth. The ground material automatically falls down through a pre-set grinding gap into the collection drawer. The desired final fineness can be defined from the outside by changing the gap width.

FEATURES

• Precise gap adjustment with an accuracy of 0.1 mm
• Fast, easy cleaning
• Simple operation
• Fast grinding disk change
• Precision setting of the final fineness even during grinding
• High service life due to generously dimensioned bearings
• Especially safe due to central tension lock of the grinding chamber
• Easy gap width check from the outside
• Combinable with the Jaw Crusher PULVERISETTE 1 classic line

EQUIPMENT / ACCESSORIES

Configure your Disk Mill PULVERISETTE 13 classic line exactly to your specific application

For every FRITSCH Disk Mill PULVERISETTE 13 classic line, you need at least one fixed and one movable grinding disk, which are available in various materials. Normally, two grinding disks of the same material are selected, which must always be harder than the sample to be ground. Grinding disks of zirconium oxide are only suitable for grinding ceramic materials, minerals, etc. and never for hard-tough samples, such as metals.

Metal-free grinding

For completely metal-free grinding of hard-brittle and medium-hard solid samples, for example for dental ceramics, we can equip your FRITSCH Disk Mill PULVERISETTE 13 classic line with a thorough polymer interior coating – together with grinding disks made of zirconium oxide – an absolutely reliable protection against iron contamination.
 

The powerful combination for pre- and fine-crushing in a single step

For fast, continuous pre- and fine-grinding particularly of large quantities of coarse material, the combination of the FRITSCH Disk Mill PULVERISETTE 13 classic line and the FRITSCH Jaw crusher PULVERISETTE 1 classic line is the ideal solution. Mounted together onto a rack and connected to each other by a chute, they automatically grind the material from a particle size of up to 95 mm to a final fineness of down to 100 μm – fast, easy and effective in a single step! 

TECHNICAL DATA

*The three-phase AC version„/3~“ is definitely preferable over a single-phase version „/1~“, since you obtain with the three-phase AC version more power, better effectiveness and a greater energy efficiency.

Alat Laboratorium Umum