FRITSCH Planetary Mill PULVERISETTE 5/4 classic line
Minta penawaran
1 unit
Pembelian Minimum- Stok 0
- Negara AsalGermany
- Dikirim DariBekasi Utara, Bekasi
- Kategori
- Update Terakhir18 Sep 2026
Spesifikasi FRITSCH Planetary Mill PULVERISETTE 5/4 classic line
Cari berbagai macam dari pilihan terlengkap Alat Laboratorium Umum.Order No. 05.5020.00
FRITSCH Planetary Mill PULVERISETTE 5/4 classic line
OVERVIEW
Ideal for large quantities
The Planetary Mill PULVERISETTE 5 classic line with 4 working stations delivers fast and reliable, due to the particularly high-energy effect of the grinding balls, loss-free grinding results of hard, medium-hard, soft, brittle, tough and moist materials down to colloidal fineness. Depending on the desired final fineness, can the grinding be performed dry, in suspension or in inert gas.
Besides for comminution, the Planetary Mill can be utilized for mixing and homogenizing of emulsions and pastes or for mechanical activation and alloying in material research.
WORKING PRINCIPLE
Comminution according to the Planetary Principle
The comminution of the material to be ground takes place primarily through the high-energy impact of grinding balls. To achieve this, the grinding bowl, containing the material to be ground and grinding balls, rotates around its own axis on a main disk whilst rotating rapidly in the opposite direction. At a certain speed, the centrifugal force causes the ground sample material and grinding balls to separate from the inner wall of the grinding bowl. The grinding balls then cross the bowl at high speed and further grind the sample material by impact against the opposite bowl wall. In addition, impact between the balls themselves on the sample material adds to the size reduction process.
Due to the rotational speed of the main disk – up to 400 rpm – achieves the PULVERISETTE 5 classic line a centrifugal acceleration of up to 22 g.
FEATURES
- Fast comminution of laboratory samples with up to 400 rpm
- 4 working stations
- Simultaneous processing of up to 8 samples
- Useful capacity up to 4 x 225 ml
- Toothed belt drive for bowls provides constant transmission ratio
- Rotational speed regulated by microprocessor
- Digital display of the actual rotational speed of the supporting disk
- Programmable grinding and pause times and grinding sequences – for short-time operation adjustable down to the second
- Smaller grinding bowls also possible with an adapter
- RS232 interface for transmission of process parameters (validation)
- Reversing function
- Overload protection with automatic rotational speed adjustment and display
- Maintenance-free drive due to electronically regulated rotary current motor (1.5 kW) with frequency converter and permanently lubricated bearings
- Grinding chamber hood safety lock with stoppage monitoring
- Membrane keyboard
- Grinding chamber with forced air ventilation
- Gas pressured springs for easy opening of the cover
- Energy-save-function (electricity-saving mode)
- Extensive accessories for simplifying your daily work
SAFE GRINDING BOWL CLAMPING
Reproducible grinding results and absolutely safe grinding bowl clamping
The constant transmission ratio, the regulated rotational speed and precision quartz timing, ensure exactly reproducible grinding results. The Safe-Lock System, which is delivered with a torque wrench, enables simple and safe clamping of the grinding bowls - absolutely risk-free.
MEASURING OF GAS PRESSURE AND TEMPERATURE
GTM – Gas Pressure and Temperature Measuring System
The Planetary Mill PULVERISETTE 5 classic line can be combined with the GTM-System for measuring of the gas pressure and temperature during grinding. This turns your mill into an analytical measuring system.
APPLICATIONS / SOLUTIONS
-
INFLUENCE OF PROPERTIES OF GRINDING BOWLS IN THE PLANETARY SYSTEM
A clean and constant wear on the inner grinding bowl surface is a question of the amount of grinding balls and size, material amount and size (coarse or fine), the grinding condition like wet or dry grinding, the grinding duration and the adjusted rotations of the planetary system.
-
FROM “BOULDER” TO NANO-PARTICLES
Medium-hard to hard materials with edge lengths up to 95 mm can be pre-crushed with the FRITSCH Jaw Crusher PULVERISETTE 1 so an additional fine comminution with many FRITSCH mills is possible.
-
During a dry grinding, often only after a short grinding period hygroscopic material tends to stick. A second factor causing this is the static charge respectively adhesive powers of fine particles.
-
CRUSHING CONCRETE COARSELY AND FINE
Concrete is a complex material, which its characteristics due to its composition and as a result of the systematic addition of additives can be adjusted very differentiated. However, this results in the demand to monitor this composition for two reasons: in order to ensure the desired useful properties and also to ensure the quality of the mixture.
-
PLANETARY BALL MILLS AS AN INSTRUMENT IN MECHANOCHEMISTRY
One of the most significant fields of application for FRITSCH Planetary Mills is mechanochemistry. This subject is in theory, as well as in practice very wide-ranging and versatile. In the article you will find summarized information about history, functionality and the fields of application of mechanochemistry.
-
PIGMENT PROCESSING: THE ISOLATION OF THE NATURALLY BEAUTIFUL
Mankind has always enjoyed enduring works of art. The particles of the pigments have always been playing a major role. For example, the oldest cave paintings still impress us today. One of the most renowned experts for the production of historical pigments is Dr. Kremer from Aichstetten (Bavaria, Germany). FRITSCH laboratory mills are of great importance in Dr. Kremer's pigment processing.
TECHNICAL DATA
| Working principle | impact force |
| Optimal for material type | hard, medium-hard, soft, brittle, tough, moist |
| Number of working stations | 4 |
| Grinding tools | grinding bowls and grinding balls |
| Materials of the grinding tools | agate, sintered corundum, silicon nitride, zirconium oxide, hardened stainless steel, hardmetal tungsten carbide |
| Grinding bowl sizes | 80, 250, 500 ml |
| Grinding ball diameter | 0.1 - 40 mm |
| Max. feed size (depends on material) | 10 mm |
| Min. sample quantity | 10 ml |
| Max. sample quantity | 900 ml |
| Final fineness (depends on material) | < 1 µm |
| Typical grinding time down to analytical fineness | 4 min |
| Grinding process | dry/wet |
| Grinding in inert gas | yes |
| Gas pressure and temperature measurement | yes |
| Rotational speed of main disk | 50 - 400 rpm |
| Transmission ratio planetary disk / grinding bowl | i relative = 1 : -2.19 |
| Effective diameter of main disk | ~ 250 mm |
| Centrifugal acceleration (g = 9.81 m/s²) | 22 g |
| Interfaces | yes |
| Electrical details | 200-240 V/1~, 50 – 60 Hz, 1730 Watt |
| Instrument also available in the following voltage | 100-120 V/1~, 50-60 Hz, 1470 watt - order no. 05.5010.00 |
| Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, grinding bowls/balls, selected rotational speed) | up to approx. LpAd = 83 dB |
| Weight | 120 kg |
| Dimensions (W x D x H) | bench top instrument 58 x 67 x 57 cm |
ACCESSORIES
Please note: For the Planetary Mill PULVERISETTE 5/4 classic line, you require at least 4 grinding bowls of your choice and the corresponding number of grinding balls. The grinding bowl material must also be harder than the material to be ground. In normal cases, grinding bowls and balls of the same material are used. To shorten the grinding time, larger or heavier grinding bowls and grinding balls with a higher density and correspondingly higher impact energy can be used. Please take note of the useful capacity, this is not identical with the bowl volume!
GRINDING BOWLS
Please select 4 grinding bowls, which are offered in the sizes 500 ml, 250 ml and 80 ml to perfectly match your sample volume. The useful capacity of the grinding bowls can be found in the selection aid. Grinding bowl 80 ml: One grinding bowl holder can be equipped with 2 bowls 80 ml or 1 bowl 80 ml using an adapter to mount the bowls on top of each other.
For the best grinding results in each individual case, all grinding bowls are available in 6 different materials, thus directly preventing contamination of the samples as a result of undesired abrasion.
SELECT GRINDING BOWL VOLUME
GRINDING BOWL 500 ML VOLUME
AGATE - SIO2 - WITH STEEL CASING
No. 50.1055.00
SINTERED CORUNDUM - 99.7% AL2O3
No. 50.1060.00
SILICON NITRIDE - SI3N4 - WITH STEEL CASING
No. 50.1310.00
ZIRCONIUM OXIDE - ZRO2
No. 50.1110.00
HARDENED, STAINLESS STEEL - FE - CR
No. 50.1090.00
REPLACEMENT SEAL RING PTFE FOR GRINDING BOWLS 500 ML VOLUME
REPLACEMENT SEAL RING PTFE 121/110 MM DIA. FOR AGATE GRINDING BOWLS OF 500 ML VOLUME
No. 50.2661.20
REPLACEMENT SEAL RING PTFE 110/101 MM DIA. FOR SILICON NITRIDE GRINDING BOWLS OF 500 ML VOLUME
No. 50.1010.20
REPLACEMENT SEAL RING PTFE 116/200 MM DIA. FOR ALL OTHER GRINDING BOWLS OF 500 ML VOLUME
No. 50.1230.20
GRINDING BOWL 250 ML VOLUME
AGATE - SIO2 - WITH STEEL CASING
No. 50.2055.00
SINTERED CORUNDUM - 99.7% AL2O3
No. 50.2060.00
SILICON NITRIDE - SI3N4 - WITH STEEL CASING
No. 50.2310.00
ZIRCONIUM OXIDE - ZRO2
No. 50.2110.00
HARDENED, STAINLESS STEEL - FE - CR
No. 50.2090.00
HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING
No. 50.2080.00
REPLACEMENT SEAL RING PTFE FOR GRINDING BOWLS 250 ML VOLUME
REPLACEMENT SEAL RING PTFE 85/70 MM DIA. FOR AGATE GRINDING BOWLS OF 80 + 250 ML VOLUME
No. 50.2011.20
REPLACEMENT SEAL RING PTFE FOR 85/76 MM DIA. FOR SILICON NITRIDE GRINDING BOWLS OF 250 ML VOLUME
No. 50.2010.20
REPLACEMENT SEAL RING PTFE 90/75 MM DIA. FOR ALL OTHER GRINDING BOWLS OF 250 ML VOLUME
No. 50.2230.20
GRINDING BOWL 80 ML VOLUME
AGATE - SIO2 - WITH STEEL CASING
No. 50.4055.00
SINTERED CORUNDUM - 99.7% AL2O3
No. 50.4060.00
SILICON NITRIDE - SI3N4
No. 50.4310.00
ZIRCONIUM OXIDE - ZRO2
No. 50.4110.00
HARDENED, STAINLESS STEEL - FE - CR
No. 50.4090.00
HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING
No. 50.4080.00
REPLACEMENT SEAL RING PTFE FOR GRINDING BOWLS 80 ML VOLUME AND ADAPTER
REPLACEMENT SEAL RING PTFE 85/70 MM DIA. FOR AGATE GRINDING BOWLS OF 80 + 250 ML VOLUME
No. 50.2011.20
REPLACEMENT SEAL RING PTFE 80/65 MM DIA. FOR ALL OTHER BOWLS OF 80 ML VOLUME
No. 50.4230.20
ADAPTER FOR GRINDING BOWLS 80 ML VOLUME
No. 90.1120.09
GRINDING BALLS
For achieving best grinding results grinding balls are available in 0.1 - 40 mm diameters and in 6 different materials, thus directly preventing contamination of the samples as a result of undesired abrasion. The recommended number of balls per grinding bowl can be found in the selection aid.
SELECT THE GRINDING BALL DIAMETER
GRINDING BALLS 40 MM DIAMETER FOR GRINDING BOWL 500 ML
SINTERED CORUNDUM - 99.7% AL2O3
No. 55.0400.06
SILICON NITRIDE - SI3N4
No. 55.0400.31
ZIRCONIUM OXIDE - ZRO2
No. 55.0400.27
HARDENED, STAINLESS STEEL - FE - CR
No. 55.0400.09
HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0400.08
GRINDING BALLS 30 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML
AGATE - SIO2 - POLISHED
No. 55.0300.05
SINTERED CORUNDUM - 99.7% AL2O3
No. 55.0300.06
SILICON NITRIDE - SI3N4
No. 55.0300.31
ZIRCONIUM OXIDE - ZRO2
No. 55.0300.27
HARDENED, STAINLESS STEEL - FE - CR
No. 55.0300.09
HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0300.08
GRINDING BALLS 20 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML
AGATE - SIO2 - POLISHED
No. 55.0200.05
SINTERED CORUNDUM - 99.7% AL2O3
No. 55.0200.06
SILICON NITRIDE - SI3N4
No. 55.0200.31
ZIRCONIUM OXIDE - ZRO2
No. 55.0200.27
HARDENED, STAINLESS STEEL - FE - CR
No. 55.0200.09
HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0200.08
GRINDING BALLS 15 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML
AGATE - SIO2 - POLISHED
No. 55.0150.05
SINTERED CORUNDUM - 99.7% AL2O3
No. 55.0150.06
SILICON NITRIDE - SI3N4
No. 55.0150.31
ZIRCONIUM OXIDE - ZRO2
No. 55.0150.27
HARDENED, STAINLESS STEEL - FE - CR
No. 55.0150.09
HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0150.08
GRINDING BALLS 10 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML
AGATE - SIO2 - POLISHED
No. 55.0100.05
SINTERED CORUNDUM - 99.7% AL2O3
No. 55.0100.06
SILICON NITRIDE - SI3N4
No. 55.0100.31
ZIRCONIUM OXIDE - ZRO2
No. 55.0100.27
HARDENED, STAINLESS STEEL - FE - CR
No. 55.0100.09
HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0100.08
GRINDING BALLS 5 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML
AGATE - SIO2 - POLISHED
No. 55.0050.05
ZIRCONIUM OXIDE - ZRO2
No. 55.0050.27
HARDENED, STAINLESS STEEL - FE - CR
No. 55.0050.09
HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0050.08
GRINDING BALLS ≤ 3 MM DIAMETER FOR GRINDING BOWL 500 ML, 250 ML, 80 ML (100 G PACKAGE)
3 MM DIA. ZIRCONIUM OXIDE ZRO2
No. 55.0030.27
2 MM DIA. ZIRCONIUM OXIDE ZRO2
No. 55.0020.27
1.5 MM DIA. ZIRCONIUM OXIDE ZRO2
No. 55.0015.27
1 MM DIA. ZIRCONIUM OXIDE ZRO2
No. 55.0010.27
0.5 MM DIA. ZIRCONIUM OXIDE ZRO2
No. 55.0005.27
0.1 MM DIA. ZIRCONIUM OXIDE ZRO2
No. 55.0001.27
3 MM DIA. HARDENED, STAINLESS STEEL - FE - CR
No. 55.0030.09
1 MM DIA. HARDENED, STAINLESS STEEL - FE - CR
No. 55.0010.09
3 MM DIA. HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0030.08
1.6 MM DIA. HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0016.08
0.6 MM DIA. HARDMETAL TUNGSTEN CARBIDE - WC
No. 55.0006.08
SPECIAL ACCESSORIES
The Gas Pressure and Temperature Measuring System - GTM for continuous measurement of gas pressure and temperature directly in the grinding bowl turns the Planetary Mills PULVERISETTE 4, PULVERISETTE 5, PULVERISETTE 6 of the FRITSCH classic line into an analytical measuring system.
For quickly and safely grinding in inert gas and for mechanical alloying classic line gassing lids are recommended.
Certificate for IQ/OQ documentation is also available.
SELECT SPECIAL ACCESSORIES
GTM - GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM
GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM (GTM) INCL. 250 ML GRINDING BOWL
No. 50.2510.00
GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM (GTM) INCL. 500 ML GRINDING BOWL
No. 50.2540.00
ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANICAL ALLOYING - GASSING LID WITH VALVES AND SEAL RING FOR GRINDING BOWL 500 ML VOLUME
AGATE - SIO2, WITH STEEL CASING
No. 50.8010.00
SILICON NITRIDE - SI3N4 - WITH STEEL CASING
No. 50.9150.00
ZIRCONIUM OXIDE - ZRO2
No. 50.9100.00
HARDENED, STAINLESS STEEL - FE - CR
No. 50.8400.00
REPLACEMENT SEAL RING VITON FOR GASSING LID FOR AGATE BOWLS 500 ML VOLUME
No. 50.8013.16
REPLACEMENT SEAL RING VITON FOR ALL GASSING LIDS 500 ML VOLUME
No. 50.1230.16
ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANICAL ALLOYING - GASSING LID WITH VALVES AND SEAL RING FOR GRINDING BOWL 250 ML VOLUME
AGATE - SIO2 - WITH STEEL CASING
No. 50.8100.00
SILICON NITRIDE - SI3N4 - WITH STEEL CASING
No. 50.8900.00
ZIRCONIUM OXIDE - ZRO2
No. 50.8950.00
HARDENED, STAINLESS STEEL - FE - CR
No. 50.8500.00
HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING
No. 50.8600.00
REPLACEMENT SEAL RING VITON FOR GASSING LID FOR AGATE BOWLS 250 ML + 80 ML VOLUME
No. 50.2011.16
REPLACEMENT SEAL RING VITON FOR GASSING LID FOR SILICON NITRIDE BOWLS 250 ML VOLUME
No. 50.2010.16
REPLACEMENT SEAL RING VITON FOR GASSING LID FOR ALL OTHER BOWLS 250 ML VOLUME
No. 50.2230.16
ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANICAL ALLOYING - GASSING LID WITH VALVES AND SEAL RING FOR GRINDING BOWL 80 ML VOLUME
AGATE - SIO2 - WITH STEEL CASING
No. 50.8100.00
ZIRCONIUM OXIDE - ZRO2
No. 50.8840.00
HARDENED, STAINLESS STEEL - FE - CR
No. 50.8700.00
HARDMETAL TUNGSTEN CARBIDE - WC - WITH STEEL CASING
No. 50.8880.00
REPLACEMENT SEAL RING VITON FOR GASSING LID FOR AGATE BOWLS 250 ML + 80 ML VOLUME
No. 50.2011.16
REPLACEMENT SEAL RING VITON FOR GASSING LID FOR ALL OTHER GRINDING BOWLS
No. 50.4230.16
ADDITIONAL LOCK-SYSTEM
No. 90.1400.00
CERTIFICATION
IQ/OQ DOCUMENTATION (QUESTIONNAIRE FORMAT - IMPLEMENTATION NOT INCLUDED)
No. 96.0220.00
Alat Laboratorium Umum
Minta penawaran sekarang
Kami adalah supplier laboratory equipment dengan komitmen memberikan layanan yang terbaik untuk kepuasan pelanggan
CV ANDALAN PRIMA MENJUAL ALAT UNTUK : Automotive Aviation Biodiesel Bitumen, Asphalt & Waxes Chemicals & Solvents Cosmetics & Fragrances Crude Oil Edible Oils Food & Beverage Greases Lubricants Marine & Bunker Fuels Paints and Varnishes Petrochemicals Petroleum Pharmaceuticals , CATEGORY ASTM Thermometers Bitumens and Waxes Certified Petroleum Standards Flash Point Fuels General Test Equipment Glassware Lubricating Greases Lubricating Oils Metal Test Specimens Penetration Tribology Viscosity
Verified Supplier
Perwira, Bekasi Utara, Bekasi, Jawa Barat
Minta penawaran
-1.png)