TROTEC Type BE40 Clamp Meter

Clamp Meter

TROTEC Type BE40 Clamp Meter

The BE40 is designed to allow you to carry out measurements quickly, comfortably and also extremely efficiently. The clamp meter registers the magnetic effect of the electric current, which means that the installation or the individual components conducting the electrical current do not have to be switched off while measuring is being carried out. The iron-core jaw clamps separate and are designed to go around cables, wires and conductor lines without coming into contact with them.

At-a-glance look at the BE40:

• Measuring range electricity: 0.01 A AC - 1000 A AC
• Measuring range voltage: 0 - 600 V (AC/DC)
• Measuring range resistance: 0.01 Ω - 20 MΩ
• Large, backlit display (3 3/4-lined)
• Line diameter / jaw opening: approx. 30 mm
• Diode test: Test current 0.3 mA, test voltage 1.5 VDC
• Continuous peep: below threshold <120 Ω, test current <1 mA
• Value falls short or exceeds measuring range threshold: “OL” appears in display
• Measuring rate: 2 measurements/sec
• Input impedance: 7.8 MΩ (VDC and VAC)
• AC current band width: 50/60Hz (AAC)
• AC voltage band width: 50/60Hz (VAC)
• Surrounding temperature (operational): -10°C to 50°C (14°F to 122°F)
• Surrounding temperature (storage): -30°C to 60°C (-22°F to 140°F)
• Relative humidity: 0% ~ max. 85%
• Measuring circuit category / Norm: CAT III 600V / IEC 61010
• Micro-environment: Degree of soiling 2
• Battery type: 2 x 1.5V AAA
• Auto power off: after 15 mins of non-use
• Dimensions: 229 x 80 x 48 mm
• Weight: 303 g

Included in the scope of delivery: BE40 clamp meter, one pair of measuring cables (red + black), 2 type AAA batteries, carry bag, user guide.