AEMC AC Current Probe Model MN02 aemc

AEMC AC Current Probe Model MN02 aemc

Spesifikasi 

Model: AEMC MN02

Nomor katalog: 2129.20

Jenis: AC Current Probe / Clamp Current Probe

Jenis pengukuran: Arus AC

Arus nominal: 100 A AC RMS

Rentang pengukuran: 50 mA–100 A AC dengan beban 1 Ω

Rentang pengukuran: 50 mA–90 A AC dengan beban 10 Ω

Rasio transformasi: 1000:1

Sinyal output: 1 mA/A AC

Output pada 100 A: 100 mA AC

Konektor output: Kabel 1,5 m dengan 2 safety banana plug 4 mm

Diameter konduktor maksimum: 10 mm

Rentang frekuensi: 48 Hz–10 kHz

Akurasi dengan beban 1 Ω: ≤1% pembacaan ±0,02 A

Akurasi dengan beban 10 Ω: ≤1,5% pembacaan ±0,01 A

Phase Shift @ 50 Hz: <3° dengan beban 1 Ω

Phase Shift @ 50 Hz: <6° dengan beban 10 Ω

Impedansi beban: 1–10 Ω

Tegangan sekunder terbuka: ≤30 V

Overload: 170 A selama 10 menit ON / 30 menit OFF

Tegangan kerja: 600 V RMS

Tegangan common mode: 600 V RMS

Dimensi: 112,5 × 37,5 × 26 mm

Berat: ±180 g

Suhu operasi: −10°C hingga +50°C

Suhu penyimpanan: −40°C hingga +80°C

Kelembapan operasi: Hingga 90% RH

Ingress Protection: IP40

Pollution Degree: 2

Kategori keselamatan: 600 V CAT III / 300 V CAT IV

Standar keselamatan: EN/IEC 61010-1 dan EN/IEC 61010-2-32

Standar EMC: EN 61326-1

Aplikasi: DMM/multimeter, data logger, recorder, oscilloscope, dan pengukuran arus AC pada aplikasi industri.

AEMC AC Current Probe Model MN02 aemc

Specifications 

Model: AEMC MN02

Catalog Number: 2129.20

Type: AC Current Probe / Clamp Current Probe

Measurement Type: AC Current

Nominal Current: 100 A AC RMS

Measurement Range: 50 mA–100 A AC with 1 Ω load

Measurement Range: 50 mA–90 A AC with 10 Ω load

Transformation Ratio: 1000:1

Output Signal: 1 mA/A AC

Output at 100 A: 100 mA AC

Output Connection: 1.5 m lead with two 4 mm safety banana plugs

Maximum Conductor Diameter: 10 mm

Frequency Range: 48 Hz–10 kHz

Accuracy with 1 Ω Load: ≤1% of reading ±0.02 A

Accuracy with 10 Ω Load: ≤1.5% of reading ±0.01 A

Phase Shift @ 50 Hz: <3° with 1 Ω load

Phase Shift @ 50 Hz: <6° with 10 Ω load

Load Impedance: 1–10 Ω

Open Secondary Voltage: ≤30 V

Overload: 170 A for 10 minutes ON / 30 minutes OFF

Working Voltage: 600 V RMS

Common Mode Voltage: 600 V RMS

Dimensions: 112.5 × 37.5 × 26 mm

Weight: Approx. 180 g

Operating Temperature: −10°C to +50°C

Storage Temperature: −40°C to +80°C

Operating Humidity: Up to 90% RH

Ingress Protection: IP40

Pollution Degree: 2

Safety Rating: 600 V CAT III / 300 V CAT IV

Safety Standard: EN/IEC 61010-1 and EN/IEC 61010-2-32

EMC Standard: EN 61326-1

Applications: DMMs/multimeters, data loggers, recorders, oscilloscopes, and AC current measurement in industrial applications.